topic Re: IV2020 - Sheet metal iFeature cut distance in Inventor Forum

IV2020 - Sheet metal iFeature cut distance

Scott_Stubbington — Thu, 24 Feb 2022 12:43:38 GMT

Hello, 🙂

I've created an iFeature and I removed Thickness(0.9 mm) as Inventor felt it was a question to be asked, having created the the iFeature I tested it and it cut to the depth of 0.9 mm, I changed the Sheet Metal Thickness and the cut depth remained unchanged. Is it possible to always use Thickness as a Cut depth in an iFeature without being a question/prompt?

Thanks in advance for your help.

Scott

Re: IV2020 - Sheet metal iFeature cut distance

Gabriel_Watson — Thu, 24 Feb 2022 14:32:45 GMT

Assuming you defined your cut/removal using a simple extrude, you had to type in that distance somewhere, and you could simply use the "Thickness" parameter instead into the same field as a formula. Extract the iFeature as such and you should be ok.

Re: IV2020 - Sheet metal iFeature cut distance

Scott_Stubbington — Thu, 24 Feb 2022 16:15:01 GMT

In the picture there is the Size Parameters section, I have removed the prompt "Enter Thickness" as I wanted the iFeature to pick up the parameter "Thickness" from the file in which the iFeature is placed, unfortunately Inventor seems to need a numerical value or prompt in there somewhere. I hope that makes sense.

Re: IV2020 - Sheet metal iFeature cut distance

Gabriel_Watson — Thu, 24 Feb 2022 19:10:45 GMT

Ok, I just replaced here "Enter Thickness" with "Thickness" and it worked fine. The parameter is acquired and the dimensions (in my picture d1) that rely on it will still keep the same formula (half, in my case).

Re: IV2020 - Sheet metal iFeature cut distance

Scott_Stubbington — Fri, 25 Feb 2022 13:32:44 GMT

Hello, 😁

Thank you fella/bud/mate... delete as appropriate. 😊

It's funny in that we edit the prompt and delete the "Prompt " text leaving just "Thickness" without actually deleting the Question and Inventor not only doesn't ask the question but also finds the Parameter I need.

Many thanks for your help. 😊

Scott

Re: IV2020 - Sheet metal iFeature cut distance

Gabriel_Watson — Fri, 25 Feb 2022 13:42:21 GMT

This is why so many companies are looking for UI/UX designers, lol...

You're welcome bud.