topic Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set. in Inventor Forum

Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set.

harrykling — Thu, 05 May 2022 19:18:48 GMT

Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set. When is Autodesk going to fix this issue. This has been going on for 6 months. Issue is in 2023 also.

Re: Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set.

tobias — Thu, 05 May 2022 18:56:12 GMT

Can you post a screenshot ?

Re: Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set.

harrykling — Thu, 05 May 2022 19:20:00 GMT

See attachments

Re: Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set.

tobias — Thu, 05 May 2022 19:36:34 GMT

Sorry about that.

I see what you mean, but you have to zoom in very far, right ?

When I have my view like the image above and I turn off and on section view its fine again.

Could maybe be a display issue.

Will see what the experts say.

Re: Inventor 2022 Model

harrykling — Thu, 05 May 2022 19:44:04 GMT

This follows thru to the drawing.
It is off by 0.10 and it varies when cutting thru different parts, sometimes more some times less.

Re: Inventor 2022 Model & Dwg's, View, Half Section does not cut model on cutting plane and is off set.

johnsonshiue — Thu, 05 May 2022 23:53:38 GMT

Hi! Yes, there is indeed a small gap between the graphics section and the offset workplane. I guess it is approximated for performance purpose. Here is what I find.

1) Go to Tools -> App Options -> Hardware -> Quality.

2) Do Rebuild All. You will see the gap becomes smaller.

3) Repeat step2.

It will get even smaller.

Many thanks!