topic Re: help needed with this model (learning slowly) in Inventor Forum

help needed with this model (learning slowly)

meguinness1 — Sun, 27 Nov 2022 23:29:09 GMT

hi guys , im try to recrate the model in the photo....im not a pro and can do some basic designs in inventor but im not able to recreate the 2x sockets holes at a angle on a flat surface .

can you help me please ?

using inventor pro 2021

thanx

Re: help needed with this model (learning slowly)

IgorMir — Sun, 27 Nov 2022 23:53:05 GMT

Here is one of the ways of getting it done. Please see the attached file in IV2020 format.

Cheers,

Igor.

Re: help needed with this model (learning slowly)

JDMather — Mon, 28 Nov 2022 12:29:14 GMT

@meguinness1

You should always Attach the *.ipt file of your attempt here.

It doesn’t have to be finished or correct, just best you can do without help.

Re: help needed with this model (learning slowly)

meguinness1 — Mon, 28 Nov 2022 13:59:49 GMT

thank you for your reply guys , i have attached the my .ipt file .

the sockets need to be on the side where the 2x side slots are....facing down the the Fillet edge.

thanx

Re: help needed with this model (learning slowly)

SBix26 — Mon, 28 Nov 2022 17:22:14 GMT

Here's another way to tackle the problem (Inventor 2021 file). Of course I guessed at many dimensions that you didn't include.

Sam B

Inventor Pro 2023.2 | Windows 10 Home 21H2

Re: help needed with this model (learning slowly)

meguinness1 — Mon, 28 Nov 2022 19:15:12 GMT

thank you guys ...i will be studying the .ipt

Re: help needed with this model (learning slowly)

JDMather — Tue, 29 Nov 2022 13:53:07 GMT

@meguinness1

Examine the Attached file...