topic Re: Section View not showing sectioned part on drawing (content center) in Inventor Forum

Section View not showing sectioned part on drawing (content center)

christophe.moerman.external — Mon, 20 Jan 2025 14:39:52 GMT

if you look closely, the holes are not visible in box cut HH. It is also strange that the holes in the middle are not visible, see section JJ:

Why no working? I use inventor 2019.

fix: nopes!

Re: Section View not showing sectioned part on drawing (content center)

kacper.suchomski — Mon, 20 Jan 2025 15:01:39 GMT

The participants in the section (assembly or individual components) must be defined.

(view in My Videos)

Re: Section View not showing sectioned part on drawing (content center)

s_ciocca — Mon, 20 Jan 2025 15:30:19 GMT

Ciao @christophe.moerman.external,

per questi particolari seleziona sul "browser albero modello" la parte interessata (quella del centro contenuti)...

poi tasto dx del mouse clicca su "partecipazione alla sezione" e poi clicca "sezione"

In questo modo vedrai i particolari in sezione (anche quelli del C.C.)

Stefano

Re: Section View not showing sectioned part on drawing (content center)

christophe.moerman.external — Mon, 20 Jan 2025 15:44:35 GMT

it's solved. Thx. why not set by default?

Re: Section View not showing sectioned part on drawing (content center)

kacper.suchomski — Mon, 20 Jan 2025 16:03:48 GMT

Often there is no need to cut profiles.

Re: Section View not showing sectioned part on drawing (content center)

christophe.moerman.external — Tue, 21 Jan 2025 07:58:04 GMT

Yes, it is, but interesting for welding or drilling or placing sizes.
When I place the cross-section, it must be a complete cross-section. No half work or tinkering. It must be 100% correctly visible en important.

If you look at it, then I have the impression that it is a design flaw = confusion!!!!!!

I don't have time to adjust there.

Best regards