topic Re: Parts not loading/slow loading but assembly run fine in Inventor Forum

Parts not loading/slow loading but assembly run fine

LBE-01 — Mon, 29 Sep 2025 05:48:31 GMT

Parts not loading/slow loading but assembly run fine. there's multiple single parts in this assembly including a fairly large mesh but it run fines loads into drawings fine, as soon as i try to open the single parts so that they can go into drawings it just loads only using like 8% of CPU and ram that all it douse. all part where drawn from the assembly.

there is lots of hexagons 30mm.

the odd part is i can find & place the parts in drawings with very few issues.

but they will need to end up as dxfs so i need the parts to do that.

Re: Parts not loading/slow loading but assembly run fine

CGBenner — Mon, 29 Sep 2025 15:35:30 GMT

@LBE-01

Hello, and welcome to the forum. Can you give us a little more information please? What version of Inventor are you using, and what are the specs of the computer you are working on? Would you be able to share the files here in this forum for others to look at? Thanks, and good luck!

Re: Parts not loading/slow loading but assembly run fine

LBE-01 — Mon, 29 Sep 2025 20:54:59 GMT

The version is Inventor 2024.3.

unfortunately i am unable to share file due to data sharing restrictions.

CPU:13th GEN INTEL CORE I7-13700K (base speed 3.4GHz)

RAM: 128GB 3200MT/s

GPU: NVIDIA GeForce RTX 3060 TI

Re: Parts not loading/slow loading but assembly run fine

johnsonshiue — Mon, 29 Sep 2025 21:38:31 GMT

Hi! I suspect this could be graphics related. If possible, please share the files in zip with me directly at johnson.shiue@autodesk.com. I would like to understand the intermittent performance issue better.

Many thanks!

Re: Parts not loading/slow loading but assembly run fine

LBE-01 — Thu, 09 Oct 2025 22:51:06 GMT

Hi, i found a work around by setting end of part to the top opening the part then moving end of part to the bottom again, it loads normally from then on till you restart inventor/PC.

thank you to johnsonshiue for the attempts to find and solve the issue