topic Re: Inventor 2024 Display Issue When Zooming in Inventor Forum

Inventor 2024 Display Issue When Zooming

iamerm — Tue, 01 Aug 2023 22:04:24 GMT

We recently upgraded to Inventor 2024 (and updated to Release 2024.1)

When zooming in on certain assemblies, we are experiencing unusual display issues that did not happen on previous releases. Here are some examples that will hopefully paint the picture:

The above examples were tested on 2 different PCs. Any suggestions on what's happening? Thanks in advance.

Re: Inventor 2024 Display Issue When Zooming

Gabriel_Watson — Wed, 02 Aug 2023 02:41:06 GMT

Some graphics rendering issues. I would recommend first testing "Conservative" under Tools tab > App. Options > Hardware, then "Quality". Then perhaps update NVIDIA and graphic card drivers. Lastly, try toggling "Software Graphics" on. If the latter fixes it, you may need a better graphics card to uncheck that for regular use.

Re: Inventor 2024 Display Issue When Zooming

iamerm — Wed, 02 Aug 2023 14:13:18 GMT

Thank you very much for your reply @Gabriel_Watson

I should have mentioned the specs of the 2 PCs we saw this issue on:

Intel Core i9-13900K Processor; 64 GB Memory; NVIDIA RTX A2000

Intel Core i7-10875H Processor; 64 GB Memory; NVIDIA GeForce RTX 2060

I would hope that they are more than capable (especially the first PC)! So I'm thinking there's something else going on here. However, I'll try to experiment with your suggestions.

Re: Inventor 2024 Display Issue When Zooming

rui_wang — Thu, 03 Aug 2023 03:42:20 GMT

@iamerm,

Thanks for your information. It is incorrect here but it cannot be reproduced on our side. Could you please provide your files and video with us for more investigation? You can reach me via email, rui.wang@autodesk.com. Thanks in advance.

Thanks,

-Rui

Re: Inventor 2024 Display Issue When Zooming

iamerm — Fri, 04 Aug 2023 12:28:14 GMT

Thank you for reaching out @rui_wang

I will try to email you today

Re: Inventor 2024 Display Issue When Zooming

CGBenner — Tue, 19 Sep 2023 13:21:37 GMT

@iamerm Did the information provided by @rui_wang answer your question? If so, can you share what the solution was so I may mark it as such so that others may find this in the future. Thank you very much!

Re: Inventor 2024 Display Issue When Zooming

iamerm — Tue, 19 Sep 2023 15:37:06 GMT

@CGBenner thank you for reaching out. No solution has been provided. Unfortunately the issue still persists.

Re: Inventor 2024 Display Issue When Zooming

johnsonshiue — Tue, 19 Sep 2023 21:50:42 GMT

Hi! Unfortunately, this is a limitation in Inventor graphics system (shared by multiple Autodesk products). When the Z-depth is small relative to the camera distance, the behind edges may bleed to the front faces.

Many thanks!

Re: Inventor 2024 Display Issue When Zooming

rui_wang — Wed, 20 Sep 2023 03:23:48 GMT

Intern bug has been reported as INVGEN-71505 and wait more information from component's team. Thanks.

Thanks,

-Rui

Re: Inventor 2024 Display Issue When Zooming

iamerm — Wed, 20 Sep 2023 10:10:57 GMT

@johnsonshiue why did this "limitation" not exist in Inventor 2021 and earlier?

Re: Inventor 2024 Display Issue When Zooming

johnsonshiue — Wed, 20 Sep 2023 23:32:19 GMT

Hi! I am sorry I misspoke. I was wrong. Rui mentioned that this was a known defect (INVGEN-71505).

Many thanks!