https://forums.autodesk.com/t5/inventor-forum/inventor-assemblies-groups-promoting-demoting-etc/m-p/5697410#M370207 <P>Hi</P><P>We are using Invenetor 2011, and i need a bit of help with the above.</P><P>&nbsp;</P><P>I have an assembly made up of say a dozen very similar "sub assemblies" that arent really sub assemblies (if that makes sense). These <EM>could</EM> be a sub assembly, but i don't want to add another level into the tree so i have all the parts in one assembly. But in reality there are a dozen similar groupings of parts. Some may even be identical, some may be the same with a part or two swapped out.</P><P>&nbsp;</P><P>I've put these groupings into folders, which makes things easier when i'm working in the assembly (copying, patterning etc...)</P><P>&nbsp;</P><P>Moving forwards, is there any way i can bring in a grouping of parts from vault/library when i start a new job? Or will i have to create a standard sub assembly, that i bring in and then immediately promote all the parts to remove this subassembly?</P><P>&nbsp;</P><P>Apologies if i sound like a right numpty for wanting to do this!</P><P>Thanks in advance</P> Mon, 29 Jun 2015 10:40:32 GMT Anonymous 2015-06-29T10:40:32Z