topic Re: Posts in Inventor Forum

Posts

Anonymous — Mon, 06 Jul 2015 11:28:21 GMT

I am using inventor to wright for a C & C mill it wrights correct but posts backwards ?

( It wrights C & C but posts Autobody ? ) I'm not sure if its a simple fix or if I have the wrong program ?

Re: Posts

JDMather — Mon, 06 Jul 2015 11:35:02 GMT

Is this an Autodesk Inventor question or is it really really

and Inventor HSM question? https://camforum.autodesk.com/

Can you elaborate on your question?

Re: Posts

Anonymous — Mon, 06 Jul 2015 11:36:39 GMT

yes

Re: Posts

JDMather — Mon, 06 Jul 2015 11:41:33 GMT

Re: Posts

mcgyvr — Mon, 06 Jul 2015 12:07:36 GMT

cravin77,

Please attempt to repost your question so we can understand it..

Its very unclear what the problem is.

can you provide an image of the problem or your actual ipt file?

Re: Posts

Anonymous — Mon, 06 Jul 2015 12:38:01 GMT

I am using the inventor program to wright to my C & C & it works ok in the simulation but when i post it in inventor for my C & C it wrights it backwards ( or ) in autobody

Re: Posts

mcgyvr — Mon, 06 Jul 2015 12:46:36 GMT

wright should be write

C & C should be CNC

Whats "autobody" ??

Which CNC machine do you have?

Which post processor are you using?

Are you sure your UCS (XYZ indicator) is pointing in the correct direction in the CAM setup?

Can you please post the ipt file here so we can look at it?

Re: Posts

Anonymous — Mon, 06 Jul 2015 13:02:58 GMT

yes it is X Y Z and everything looks good in simulation but when it post it wrights it X Y & Z are backwards to the mill and it comes out as an NC. file

Re: Posts

Mark.Lancaster — Mon, 06 Jul 2015 13:29:17 GMT

Inventor out of the box does not have CNC capabilities. Are you using Inventor HSM or some other CNC application for Inventor? It helps everyone if you gives us more information.

Re: Posts

mcgyvr — Mon, 06 Jul 2015 14:03:30 GMT

@Anonymous wrote:

yes it is X Y Z and everything looks good in simulation but when it post it wrights it X Y & Z are backwards to the mill and it comes out as an NC. file

Please be more specific and actually try to answer ALL the questions that are asked to you...

Can you please post your ipt file?

Can you please let us know which post processor you are using?

Can you please also post your nc file?

Thats 3 questions.. Please respond with ALL the information I am requesting

Re: Posts

Anonymous — Mon, 06 Jul 2015 14:50:37 GMT

its an add on to inventor called CAM it translates to a C & C

Re: Posts

Anonymous — Mon, 06 Jul 2015 15:00:20 GMT

@Anonymous wrote:
its an add on to inventor called CAM it translates to a C & C

CNC = Computer Numerical Control

C & C = Gibberish (Or C&C Music Factory)

Re: Posts

Mark.Lancaster — Mon, 06 Jul 2015 15:08:59 GMT

"its an add on to inventor called CAM"... <-- Who makes it? If its not an Autodesk add-on product (like Autodesk Inventor HSM) then you need to contact the Vendor of the add-on.

Re: Posts

Anonymous — Mon, 06 Jul 2015 15:12:01 GMT

CNC

Windows 7

intel core i7

Re: Posts

Anonymous — Mon, 06 Jul 2015 15:12:43 GMT

inventor makes it

Re: Posts

Anonymous — Mon, 06 Jul 2015 15:13:57 GMT

its an add on to invetor because not everyone needs the add on for CNC

Re: Posts

Anonymous — Mon, 06 Jul 2015 15:16:03 GMT

@Anonymous wrote:
its an add on to invetor because not everyone needs the add on for CNC

Are you talking about InventorCAM? Which is NOT made by Autodesk?

Re: Posts

Anonymous — Mon, 06 Jul 2015 15:54:57 GMT

yes it in post 11 right next to tools

Re: Posts

mcgyvr — Mon, 06 Jul 2015 16:26:53 GMT

Cravin77,

Please use this link to request support.

http://www.inventorcam.com/us/support/support/

InventorCAM is NOT an Autodesk product.. As such it is beyond the scope of this forum.

I do not have InventorCAM so I cannot see your potential toolpaths so I cannot check the validity of the NC file.

Re: Posts

Anonymous — Wed, 08 Jul 2015 10:16:56 GMT

Its is Autodesk Inventor HSM