topic Re: T&P; Using Iparts or variations without CC in Inventor Forum

topic Re: T&P; Using Iparts or variations without CC in Inventor Forum https://forums.autodesk.com/t5/inventor-forum/t-amp-p-using-iparts-or-variations-without-cc/m-p/5757805#M365553 NO, There is no way. iparts are derived from the main part and in the process you loose the authoring information. give us a vote on the idea station to get this implemented:<A href="https://forums.autodesk.com/t5/inventor-ideastation/tube-and-pipe-overhaul/idi-p/5518269" target="_self">http://forums.autodesk.com/t5/inventor-ideastation/tube-and-pipe-overhaul/idi-p/5518269</A> A better way would be to use ilogic components but you need to run two inventor sessions and in one you disable the T&P addin and you generate the parts and then you place them with place fitting in the other session. If you remember, in the pipe clips video I am explaining all of this.   CC is easy especially if you use excel to modify the family table. You can also use the material wizard to add new rows and/or families based on your current in which you can do all the changes.   Wed, 05 Aug 2015 13:33:47 GMT Anonymous 2015-08-05T13:33:47Z