https://forums.autodesk.com/t5/inventor-forum/australian-standards-as-greyed-out-inventor-2015/m-p/5830739#M359751 <P>Did you check the project file like I attached before if Other library is checked.</P><P>If not, you don't have the AS Library.</P><P>&nbsp;</P><OL><LI>Close all files within Inventor.</LI><LI>Go to the <STRONG>Get Started</STRONG> tab.</LI><LI>Select <STRONG>Projects</STRONG> button.</LI><LI>The Project file that is cheched is the project file you are working in.</LI><LI>Press the <STRONG>Configure Content Center Library</STRONG> button. (right above the Done button). (See also the picture that I sent before).</LI><LI>Be sure that <STRONG>Inventor Other</STRONG> library is checked.</LI><LI><STRONG>Save</STRONG> the projectfile.</LI><LI>Start the assembly again and see if the <STRONG>AS</STRONG> library is availible.</LI></OL><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Thu, 24 Sep 2015 07:08:04 GMT Marco.Takx 2015-09-24T07:08:04Z