https://forums.autodesk.com/t5/inventor-forum/constraint-arrows-visibility/m-p/11363579#M355358 <P>Depending on modelled part/assembly, being able to change/adjust the size of the arrows would be beneficial.</P><P>Sometimes on bigger models 40'x40'x40' (12mx12mx12m)</P><P>I have found that rotating the model completely around 360 degrees, that the arrow(s) come into view and they can be very small compared to model-hard to see,</P><P>I seem to remember in earlier releases the arrows were often large compared to the model-Often being too large, but at least you could see them</P><P>&nbsp;</P><P>Perhaps we need a button/key/option to show arrow a larger arrow - like magnify so we can narrow in to the part in question and mainly fix any broken constraints.</P><P>Alternatively, have an option to use tiny, small, medium, large, very large or auto-size arrows from the options settings - so we can adjust depending on the size of project being considered</P><P>&nbsp;</P><P>Arrows and faces being colo(u)red is quite helpful as well.</P> Wed, 17 Aug 2022 04:16:03 GMT lance8 2022-08-17T04:16:03Z