topic Betreff: Extend in Inventor Forum

Extend

Anonymous — Sat, 07 Nov 2015 01:42:13 GMT

Hi,

How do i extend the member created with F.G.I need to extend both faces by 20mm. Parts 2015

I tried the Length-Shorten Frame Member but it lenghtened the top face not the side face. I could not get it to lenghten the chosen face (see picture)

Regards,

Barry

Betreff: Extend

WHolzwarth — Sat, 07 Nov 2015 09:51:34 GMT

Like that? (New 2015 dataset in Zip)

Walter

Betreff: Extend

Anonymous — Sat, 07 Nov 2015 10:34:17 GMT

Thanks wh

Barry

Betreff: Extend

mdavis22569 — Sat, 07 Nov 2015 10:35:50 GMT

All I did was open the part and adjust the parametric value for G/H

Betreff: Extend

Anonymous — Sat, 07 Nov 2015 10:43:30 GMT

Thanks Mike. That is a good solution

How do i now change the size of the new member in the Family Tree from 130 x 50 to 130 x 90. Will this change for BOM as well?

Thanks again

Barry

Betreff: Extend

WHolzwarth — Sat, 07 Nov 2015 11:24:07 GMT

Easiest way could be selecting a size 90x10, 130 long.

But that would destroy your frame

Betreff: Extend

Anonymous — Sat, 07 Nov 2015 11:27:30 GMT

~Thanks wh

I have no option for the 90 x 10 x 130 in ISO F.G Members

Thanks

Barry

Betreff: Extend

WHolzwarth — Sat, 07 Nov 2015 12:38:45 GMT

Hmm. Have another look.

Betreff: Extend

Anonymous — Sat, 07 Nov 2015 12:57:33 GMT

Thanks

I in my dropdown list cannot see 90 x 10 -130 or am i looking at the wrong list?

Thanks

Barry

Betreff: Extend

WHolzwarth — Sat, 07 Nov 2015 15:58:51 GMT

Frame members only show section dimensions, width and height. Length is determined by the skeleton sketch.

I placed the 90x10x130 part directly from Content Center with a rigid joint to the existing cube and deleted that part after that from the frame.

Betreff: Extend

Anonymous — Sun, 08 Nov 2015 00:58:44 GMT

wh, of course what was i thinking (lack of thinking)

Thanks

Barry