topic Betreff: Small issue here- Patterns and parameters, Inventor 2016 Sp1 in Inventor Forum

Small issue here- Patterns and parameters, Inventor 2016 Sp1

Dan_Margulius — Sat, 02 Jan 2016 15:24:45 GMT

Hello,

I am attching of what to be a very proud crane link.

I have an L parameter, U and U2 parametes who are all linked.

Whenever we change L we expect to see U and U2 change but then Inventor throws everything in different directions.

What i did wrong here?

Thanks

Dan

Betreff: Small issue here- Patterns and parameters, Inventor 2016 Sp1

WHolzwarth — Sat, 02 Jan 2016 16:18:41 GMT

Mirroring does it, if L=n*1250 (n=1,2,3,4,..)

2016 file attached

Walter

Betreff: Small issue here- Patterns and parameters, Inventor 2016 Sp1

Dan_Margulius — Sat, 02 Jan 2016 16:23:37 GMT

Hello,
Thank you, i will look at it. The reason I did not use Mirror or other smart features is because this part goes to Revit. Mirror is not supported as a BIM feature. Extrude with tapper also not supported. This is forcing me into a very basic workflow.
Thanks
Dan

Betreff: Small issue here- Patterns and parameters, Inventor 2016 Sp1

WHolzwarth — Sat, 02 Jan 2016 17:17:20 GMT

Oh, I see.

Does saving as IFC help out?

Betreff: Small issue here- Patterns and parameters, Inventor 2016 Sp1

Dan_Margulius — Sat, 02 Jan 2016 17:21:46 GMT

Hello,
I suggested to our Revit guys. They said that they want to change INV parameters and it is possible only in rfa format. If the INV parameters can be edited in ifc than it is a definitely WIN for me.
Thanks
Dan

Re: Small issue here- Patterns and parameters, Inventor 2016 Sp1

hosford — Sun, 03 Jan 2016 18:19:10 GMT

Dan

If you anchor sketch 12 your model will update properly.