topic Re: Inserting view from model in Inventor Forum

Inserting view from model

ToddPig — Tue, 21 Jun 2016 14:14:31 GMT

After downgrading to Inventor 2017, I found that I'm no longer able to add a view to the drawing that is in the same orientation as the model. I think 2015 had a drop down menu that allowed me to select "use model" and then that is the view that was added to the drawing. Very useful for reference views, etc...

I currently have to add a view (which seems to always be the front view and it comes in centered on the sheet (not useful)), and then I have to add a projected view to get a view close to what I would like.

As usual, any help would be appreciated.

Thanks,

Todd

Re: Inserting view from model

swalton — Tue, 21 Jun 2016 14:21:00 GMT

Take a look at this thread to see if it helps.

http://forums.autodesk.com/t5/inventor-general-discussion/create-drawing-in-2017-how-to-work-with/m-p/6377521/highlight/true#M599687

Re: Inserting view from model

mdavis22569 — Tue, 21 Jun 2016 14:28:23 GMT

correct ...the front view, side, iso are gone

you have the down arrow on the side to use and you can rotate via the cube.

This started in 2016.

Re: Inserting view from model

mcgyvr — Tue, 21 Jun 2016 14:31:02 GMT

yep.. Just hit the down arrow next to the view cube and hit custom view orientation and that will take you to the model and hit the Finish custom view button like before..

Re: Inserting view from model

mflayler — Tue, 21 Jun 2016 14:32:39 GMT

Here's some other neat things to know about the newer view placement for Base Views...

http://blogs.rand.com/manufacturing/2016/01/tech-tips-dynamic-scaling-of-drawing-views.html

Re: Inserting view from model

JDMather — Tue, 21 Jun 2016 15:09:43 GMT

"The little green corners around the Base View preview look like perhaps they are just framing cursors..."

jeez louise Mark, how long have you kept that secret.

Re: Inserting view from model

mflayler — Tue, 21 Jun 2016 15:18:56 GMT

Hey, just trying to add value

I played with this back in beta, but it wasn't advertised well during the inception of 2016.

Re: Inserting view from model

ToddPig — Tue, 21 Jun 2016 16:16:04 GMT

GREAT ARTICLE!!!

THANKS

Re: Inserting view from model

Mark.Lancaster — Tue, 21 Jun 2016 16:34:04 GMT

@ToddPig

You can also right from your part or assembly orientation, right mouse click in the Inventor browser and select "Create Drawing View".. Base view of your drawing is based on the orientation of your model.