topic Re: how to make this rib ? in Inventor Forum

how to make this rib ?

Anonymous — Mon, 25 Jul 2016 17:13:47 GMT

I want to make a rib from the Autodesk inventor learn by doing tutorial :

I can't get a preview of the rib and this is what I do :

Binga — Mon, 25 Jul 2016 17:33:08 GMT

First, If you draw the piece symetry you don't need to create a plane to use to the rib. See:

It was ok for me:

Check if the lines is touching your body.

Can you share your part?

JDMather — Mon, 25 Jul 2016 17:35:59 GMT

Attach your *.ipt file here and end all doubt.

Anonymous — Mon, 25 Jul 2016 21:51:36 GMT

I don't know why it doesn't work for me.

Here it is.

JDMather — Mon, 25 Jul 2016 22:01:19 GMT

Uhmm, you don't have a sketch for the Rib feature in the file that you attached.

Also, you don't need the workplane that you created as it is simply a duplication of the existing YZ Plane.

Also, I recommend that you install the Service Packs and Updates.

Anonymous — Mon, 25 Jul 2016 23:03:18 GMT

I don't know what's wrong !1

So can you share your file of the complete part with the rib.

JDMather — Mon, 25 Jul 2016 23:11:45 GMT

In your initial post you have a Sketch13 in the image that isn't in the file that you attached.

I know what you have done wrong - but I want you to add that sketch to your file and attach it here again.

Anonymous — Tue, 26 Jul 2016 00:03:45 GMT

Hope you tell me what I am doing wrong :]

JDMather — Tue, 26 Jul 2016 11:01:55 GMT

Are you working on your own personal machine or are you working on a school machine?

If you own machine - install the Service Packs and Updates for 2015.

Make sure to set these selections.