topic Re: End Fill in Inventor Forum

End Fill

Anonymous — Sun, 31 Jul 2016 19:33:22 GMT

When I selected the weld one by one end fill is coming. If I selected the weld all together end fill is not coming. End fill tool also not producing any result. How can I fix this?

Re: End Fill

mdavis22569 — Sun, 31 Jul 2016 19:51:42 GMT

Works for me for how it's suppose too ..

Why do you want to pick all of them all at once?

What does your instructor say? What does your assignment say to do?

Re: End Fill

Anonymous — Sun, 31 Jul 2016 20:16:52 GMT

My 1st face was one face my 2nd faces were two faces. So that weld was incomplete one. Is it possible to fill it by using end tool? Assignment suggests to use END FILL tool but it is not fixing the error.

I am ahead of the assignment work.

Re: End Fill

mdavis22569 — Sun, 31 Jul 2016 21:12:29 GMT

@Anonymous wrote:

My 1st face was one face my 2nd faces were two faces. So that weld was incomplete one. Is it possible to fill it by using end tool? Assignment suggests to use END FILL tool but it is not fixing the error.

I am ahead of the assignment

Since your ahead ... Might be a good time to go back and repeat an assignment that gave you the most problems ... Get a better understanding of it and more fluid in the use of the software .. Just a suggestion.

as for the assignment now .. Don't pick 2 for the 2nd face ..it should work fine then

Re: End Fill

CCarreiras — Sun, 31 Jul 2016 21:02:29 GMT

Hi!

You have to do that in two steps.

Re: End Fill

Anonymous — Sun, 31 Jul 2016 21:18:49 GMT

Thanks.

What is the purpose of END FILL tool?

Re: End Fill

mdavis22569 — Sun, 31 Jul 2016 21:26:14 GMT

by Paul (and Curtis)

https://books.google.com/books?id=KB4FCAAAQBAJ&pg=PA523&lpg=PA523&dq=inventor+weld+end+fill&source=bl&ots=9IRBVpvA03&sig=ZyrM3T4vR4RsRNLHdMgIa9ifAqc&hl=en&sa=X&ved=0ahUKEwjy2eWA0Z7OAhXFHR4KHekyBeEQ6AEIWjAM#v=onepage&q=inventor%20weld%20end%20fill&f=false

Why does your assignment recommend it .... what's the full exercise?

Re: End Fill

Anonymous — Sun, 31 Jul 2016 21:35:42 GMT

Here is what assignment says.

Re: End Fill

mdavis22569 — Sun, 31 Jul 2016 21:41:47 GMT

do you see how on the end fill ...the hatching of a weld is shown on it ...

where if you didn't it would look just grey ....