topic Re: Interference in Inventor Forum

Interference

Anonymous — Mon, 01 Aug 2016 15:00:19 GMT

Cap and Screw were sketch according to given dimension. But interference was detected. How to fix this problem?

mdavis22569 — Mon, 01 Aug 2016 15:19:16 GMT

You don't

You have a threaded hole properly done right?

and you have the correct thread on the set screw right?

You see the min for the hole ...and the max shown on the set screw

Curtis_W — Mon, 01 Aug 2016 15:19:38 GMT

Hi fiatnm,

You can often find answers to common questions on this discussion forum by searching.

In this case there is a link from mcgyvr that explains this well:

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

mdavis22569 — Mon, 01 Aug 2016 15:21:51 GMT

JDMather — Mon, 01 Aug 2016 16:00:47 GMT

Looks like threads have given you problems for 5 mths.

oops, make that 6 mths

It is one thing to learn software commands and quite another thing to learn engineering principles utilizing CAD.

Anonymous — Tue, 02 Aug 2016 13:32:09 GMT

------------------------------------------------------------------------------------------------------------------

Even though I am able to fix the error using “Analyze Interference Tips”. I am not able to see any changes in the mode window.

mdavis22569 — Tue, 02 Aug 2016 13:37:50 GMT

did you change the setting like the blog pointed out ..?

Anonymous — Tue, 02 Aug 2016 14:02:45 GMT

Blog’s Document Settings window is bit different from mine. I only changed minor to major.