topic Re: COG of every part in assembly showing in Inventor Forum

COG of every part in assembly showing

Cambo_Slambo — Thu, 08 Sep 2016 07:56:43 GMT

A workmate came to me with a problem I've never seen. He created a simple steel grillage, placed that assembly into another and added d-rings etc into the master assembly. He then vaulted this. Upon opening this morning the COG of all sub-assemblies are now showing, even though under "view" COG is turned off! If you open each assembly the COG is turned off on these also. See attached image, any ideas?

Re: COG of every part in assembly showing

mdavis22569 — Thu, 08 Sep 2016 09:27:58 GMT

Make sure you're up to date on all of the updates and patches ...

It was a known issues I believe in one of the versions ...

if that doesn't help, there is an Ilogic to help turn them all off

Re: COG of every part in assembly showing

PetterMoldestad — Wed, 08 Jan 2020 07:30:50 GMT

Hello.

We have the same problem on an assembly now. What was the iLogic?

Re: COG of every part in assembly showing

admaiora — Wed, 08 Jan 2020 08:10:37 GMT

Open affected assembly
Use command "Rebuild All"
Use command "Update Mass"
Save assembly and all references
Close assembly and all open files
Re-Open assembly

Re: COG of every part in assembly showing

PetterMoldestad — Wed, 08 Jan 2020 08:15:24 GMT

That worked.

Thanks a lot. 🙂