topic Re: I would like to ask for modeling help. in Inventor Forum

I would like to ask for modeling help.

cjfgns1003 — Thu, 07 Dec 2023 02:48:19 GMT

Is it possible to express the figure below through modeling?

*Please let me know if you need any more information for modeling

Re: I would like to ask for modeling help.

kacper.suchomski — Thu, 07 Dec 2023 03:03:54 GMT

Here is one of the methods:

(view in My Videos)

Re: I would like to ask for modeling help.

kacper.suchomski — Thu, 07 Dec 2023 03:16:43 GMT

And here's another one:

(view in My Videos)

Of course, you need to choose your dimensions.

Methods can be mixed. depending on need:

You decide for yourself whether the parameters of a helix with a defined pitch or a wound helix with a defined inclination are better for you. You can precisely parameterize everything.
You decide whether you want to do it in a single part environment using solids or in an assembly environment using components.
In the parts environment, you can additionally choose whether you do everything on one block, separate the core from the step, or whether each step is a separate body.

Good luck

Re: I would like to ask for modeling help.

kacper.suchomski — Thu, 07 Dec 2023 03:32:02 GMT

Here is another example of parameterizing the spiral and determining the characteristics of inclination, pitch and number of revolutions:

https://youtu.be/BTMJUchG7h4?feature=shared

Re: I would like to ask for modeling help.

johnsonshiue — Thu, 07 Dec 2023 23:54:00 GMT

Hi! For this particular model, the detail view is kind of cheating. It shows the coil before it is bent. The drawing views can be created in Inventor. However, you will need two parts or one part with two model states (unbent and bent).

Many thanks!

Re: I would like to ask for modeling help.

cjfgns1003 — Fri, 08 Dec 2023 02:09:36 GMT

Can you make one for example?

Re: I would like to ask for modeling help.

pcrawley — Fri, 08 Dec 2023 02:24:12 GMT

@cjfgns1003 wrote:
Can you make one for example?

Did you miss the three posts above from @kacper.suchomski showing you how to make it?