topic Re: how to create the profile tooth octoide and spherical bevel gear in Inventor Forum

how to create the profile tooth octoide and spherical bevel gear

Anonymous — Wed, 26 Oct 2016 19:46:14 GMT

hello

how to create the profile tooth octoide and spherical the bevel gear

how to calculate thickness the tooth bevel gear

Re: how to create the profile tooth octoide and spherical bevel gear

Cadmanto — Wed, 26 Oct 2016 20:07:12 GMT

Welcome to the forum.

Not really sure what that looks like. Posting an image would be helpful. Have you tried going to the website of the manufacturer of these gears to see if they have available models to download?

If this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudos are appreciated. Thanks!!!!

Re: how to create the profile tooth octoide and spherical bevel gear

johnsonshiue — Thu, 27 Oct 2016 16:17:45 GMT

Hi! Have you tried using Design Accelerator -> Power Transmission -> Bevel Gears. If I understood you requirement, it seems more like customized. You might need to create the Bevel Gears using Design Accelerator and then tweak the geometry using modeling features.

Thanks!

Re: how to create the profile tooth octoide and spherical bevel gear

Anonymous — Sat, 29 Oct 2016 19:46:38 GMT

thanks

how to calculate this equation ?

Re: how to create the profile tooth octoide and spherical bevel gear

WHolzwarth — Sat, 29 Oct 2016 20:24:31 GMT

Hmm, Johnson.

Bevel gear calculation needs improvement. By definition, all rays along the gears of straight setups need to be in the intersection point of both gear axes.

But that's not the case with Inventor's bevel gear generator.

Walter