topic Re: Projected sketch geometry not updating in Inventor Forum

Projected sketch geometry not updating

mjc_design — Fri, 06 Jan 2017 11:44:28 GMT

Hi, using IV2015 and I have a line projected from one sketch to another which will not update. The part containing the sketch is a skeleton for a frame, so I am reluctant to delete the line as I will then lose members in my frame.

How can I force IV to update the line? I have tried rebuild all.

The two red lines are the ones with the issue.

I've attached the part file, sketches 9, 10 & 11 are where its at

Re: Projected sketch geometry not updating

mjc_design — Fri, 06 Jan 2017 12:22:01 GMT

On a side note, after attaching the file here I seem to have lost all rights to the file and IV won't even open it anymore. Vault has disowned it completely, and I can't even delete or move the file.

weird.

Re: Projected sketch geometry not updating

stuart_smith82 — Fri, 06 Jan 2017 12:38:10 GMT

Hi,

It is pretty hard to see what lines you mean when opening the model as there are so many, if you could change the colour of the two lines in question it would assist in identifying them.

Thanks

Stuart Smith

Group Data Management Consultant Graitec UK
stuart.smith@graitec.co.uk | www.graitec.co.uk

Blog: https://www.graitec.co.uk/blog/blogger/smith
Graitec Manufacturing Blog: https://www.graitec.co.uk/blog/categories/mechanical

Did you find this reply helpful? If so please use the Accept as Solution or Kudos button below.