topic How to create involute spline in Inventor Forum

How to create involute spline

ggtoutounji — Wed, 13 Dec 2017 19:39:00 GMT

Hello,

How to create a spline internal to a coupling (see attached)? Spline is B100x94 DIN 5482. I have never done this before. Inventor professional 2013.

Thanks.

Re: How to create involute spline

JDMather — Wed, 13 Dec 2017 19:49:11 GMT

Place part into assembly.

Go to Design tab>.....

Re: How to create involute spline

ggtoutounji — Wed, 13 Dec 2017 20:05:09 GMT

Thank you. I did that but did not know how to proceed step by step.

Re: How to create involute spline

jhackney1972 — Wed, 13 Dec 2017 20:32:56 GMT

You did not supply your part or the specifications for you internal involve spline so I just made up one to show you the basic process of the using the Design Accelerator. Take a look at the attached Screencast.

Re: How to create involute spline

ggtoutounji — Thu, 14 Dec 2017 18:09:39 GMT

Thank you. Very helpful.

Re: How to create involute spline

ggtoutounji — Fri, 16 Feb 2018 21:29:09 GMT

Hello,

I tried to make involute spline but i did not see 100x94mm with 44 teeth in DIN5480 options.

Thank you.

Re: How to create involute spline

jhackney1972 — Fri, 16 Feb 2018 22:04:22 GMT

If the size you want is not in this list, then if is not available in the Inventor dataset and you will have to model it yourself from dimensional prints. I checked online for the specification for a 94mm diameter, 44 tooth involute spline and it does not exist as a standard. Just in case I read you description wrong, a 100mm diameter, 44 tooth does not exist either. If the spline is not a standard DIN involute, then Inventor will not have it listed.

Re: How to create involute spline

ggtoutounji — Tue, 20 Feb 2018 21:36:51 GMT

Thank you.