topic Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis Point in Inventor Forum

Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis Point

andrewiv — Fri, 15 Dec 2017 01:26:58 GMT

When trying to create a work feature in 2018.2 the automatic select other does not work. You can still right click and use select other, but the drop down will not pop up on its own. It works fine with other features like the hole command, but not with planes, axis, or points. It happens in both part and assembly environments.

kelly.young has edited your subject line for clarity: Select other bug

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing Plane Axis Point

mcgyvr — Fri, 15 Dec 2017 01:28:26 GMT

I see the same issue..

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis P

kelly.young — Fri, 15 Dec 2017 01:30:34 GMT

@andrewiv thanks for posting. Sent to the development team for further review. Will post back with any information I find.

Please select the Accept as Solution button if a post solves your issue or answers your question.

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis P

johnsonshiue — Fri, 15 Dec 2017 01:35:12 GMT

Hi Andrew,

I am able to reproduce the behavior. I don't have a good explanation. It looks like a bug to me. I will work with project team to understand it better.

Many thanks!

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis P

Xun.Zhang — Fri, 15 Dec 2017 02:26:55 GMT

@andrewiv, @mcgyvr,

I checked with Inventor 2016, 2017 and 2018, the behavior is the same, It seems nothing changed when creating workfeature, the select other context menu is always hide.

Could you help confirm?

Thanks!

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis P

mcgyvr — Fri, 15 Dec 2017 13:01:06 GMT

@Xun.Zhang wrote:

@andrewiv, @mcgyvr,

I checked with Inventor 2016, 2017 and 2018, the behavior is the same, It seems nothing changed when creating workfeature, the select other context menu is always hide.

Could you help confirm?

Thanks!

Ok... so its been a bug for 3 years and someone finally noticed it..

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis P

Xun.Zhang — Fri, 15 Dec 2017 13:46:07 GMT

@mcgyvr,

I am sorry for that.

Ticket INVGEN-12065 was open to track it down.

Thank you as usual!

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis Point

didr1234 — Thu, 20 Jun 2024 13:53:46 GMT

sad to say that I have the same problem with Inventor 2024.3!!

CTRL+A works fine but the automatic scroll down menu doesn't show after the seconds set in the application option

Re: Inventor 2018 Bug: Automatic Select Other Drop Down Missing For Plane Axis Point

johnsonshiue — Fri, 21 Jun 2024 22:17:59 GMT

Hi Diego,

I am not sure if your issue is the same as the OP's. If you are looking for Autoscroll option, it is located in upper right corner of the browser. Click on the three-bar menu -> check Autoscroll.

Many thanks!