topic Replace Model Reference (.iam with .ipt ?) in Inventor Forum

Replace Model Reference (.iam with .ipt ?)

MikeKovacik4928 — Wed, 10 Jan 2018 10:16:40 GMT

Hi all

Having read a similar post

https://forums.autodesk.com/t5/inventor-forum/replace-model-reference-iam-with-ipt/m-p/3065154#M405510

I see this is not a new issue at all.

I also have found a workaround.

I create a new assembly with only the one part in it, that I want to replace.

I agree with the previous post that it would be useful to have that functionality in Inventor,

which apparently Solidworks does have.

See attached

Michael Kovacik
2d & 3d Autocad and Inventor designer/draughtsman
.
Draughting/Designing (Manufacturing) (31 yrs)
-Drawing Board (3 yrs)
--Cad (28 yrs)
---Cadkey (4 yrs)
---AutoCAD 2d & 3d (16 yrs)
---Inventor (4 yrs)
---Autocad and Inventor Simultaneously (4 years)
---(and recently Autocad/Inventor Customisation)
.
Autodesk Product Design Suite Ultimate 2018
Autocad 2018, Inventor Pro 2018
(personal licensed copy)
.
Johannesburg, South Africa
.
(Impossible only means you haven't
found the solution yet)

Re: Replace Model Reference (.iam with .ipt ?)

johnsonshiue — Wed, 10 Jan 2018 15:20:21 GMT

Hi! I have heard similar request before and it has been discussed internally. Unfortunately, there is no straight forward solution to do that technically. I recall there are similar ideas on Inventor Ideas forum. Please kudo the idea.

Many thanks!

Re: Replace Model Reference (.iam with .ipt ?)

MikeKovacik4928 — Wed, 10 Jan 2018 19:31:36 GMT

Thanks Johnson,

I will do that.

Mike

Re: Replace Model Reference (.iam with .ipt ?)

kelly.young — Tue, 23 Jan 2018 21:07:27 GMT

@MikeKovacik4928 here are the links I could find regarding the idea:

Replace Model Reference .ipt to .iam

Replace Model Reference per base view

iam & ipt swap when resolving links.

replacing file type on reference drawing in idw

Assembly Component Replacement and Fixing Broken Constraints

Replace part on a main assembly with Demote subassembly that containt this part

Maintain Constraints when Assembly replaces a Part

Re: Replace Model Reference (.iam with .ipt ?)

Anonymous — Wed, 27 Jun 2018 14:51:10 GMT

I have a drawing that has broken links - the links are broken because they used to point to an assembly (iam) they now point to a part (ipt). I can't FIX it because it was broken in a way that is supposedly technically impossible.

I can't send anyone the file unless you want to sign a Draconian NDA (the process for which I can't even initiate), so trust me, version 29 works fine, version 30 has broken links pointing to the wrong type of file. If it can be done by accident, it can be done on purpose.

Re: Replace Model Reference (.iam with .ipt ?)

SER4 — Fri, 23 Feb 2024 16:35:43 GMT

I was able to use the Vault Copy Design and Replace the drawing's reference from the part with a reference to an assembly (after several Vault crashes and warnings). HOWEVER, when I go to open up the drawing, all the drawing views are blank!

Re: Replace Model Reference (.iam with .ipt ?)

Frederick_Law — Fri, 23 Feb 2024 16:41:09 GMT

@SER4 wrote:
HOWEVER, when I go to open up the drawing, all the drawing views are blank!

Yes, because all the referenced points, edges, faces are gone.