topic Re: Pipe Break Appearance in IDW in Inventor Forum

Pipe Break Appearance in IDW

MikeKovacik4928 — Mon, 29 Jan 2018 10:10:19 GMT

Hi All Inventor Users

How do you all deal with pipe break appearance in IDW.

Personally

1. I either create a separate extra model and model the pipe break

specifically for showing in the idw.

2. I do a crop in the idw view, maike the crop line invisible

and then sketch the pipe break. If necessary I will do it on both sides

The view break command gives 2 options, neither of which apply to circular extruded shapes like pipes

Michael Kovacik
2d & 3d Autocad and Inventor designer/draughtsman
.
Draughting/Designing (Manufacturing) (31 yrs)
-Drawing Board (3 yrs)
--Cad (28 yrs)
---Cadkey (4 yrs)
---AutoCAD 2d & 3d (16 yrs)
---Inventor (4 yrs)
---Autocad and Inventor Simultaneously (4 years)
---(and recently Autocad/Inventor Customisation)
.
Autodesk Product Design Suite Ultimate 2018
Autocad 2018, Inventor Pro 2018
(personal licensed copy)
.
Johannesburg, South Africa
.
(Impossible only means you haven't
found the solution yet)

Re: Pipe Break Appearance in IDW

Xun.Zhang — Mon, 29 Jan 2018 12:50:06 GMT

Hi @MikeKovacik4928,

I think this could be a new idea for ideastation to gathering support. before that, I think Drawing sketch symbol might a good choice. For example, define a symbol library and create the pipe breaks and then insert to the place you want.

Hope it helps!

Re: Pipe Break Appearance in IDW

swalton — Mon, 29 Jan 2018 14:05:08 GMT

Xun,

This functionality request has been posted to the Ideas board for almost 5 years.

https://forums.autodesk.com/t5/inventor-ideas/s-shaped-broken-view-for-shafts/idi-p/3793222

Also:

https://forums.autodesk.com/t5/inventor-ideas/pipe-section/idi-p/5246795

There are 323 votes between the two posts. How many more are required to actually get this implemented?

Re: Pipe Break Appearance in IDW

jletcher — Mon, 29 Jan 2018 14:17:05 GMT

Needs 7 years and you have to hold your breath and one eye close with toes up in the air..

Re: Pipe Break Appearance in IDW

kelly.young — Tue, 30 Jan 2018 22:01:10 GMT

@MikeKovacik4928 thanks for posting the good image, would you mind adding it the the bottom of the two ideas shared?

I went and added two more votes.

Keeping the idea active and voted on is the best way to draw attention and get it implemented.

Please select the Accept as Solution button if a post solves your issue or answers your question.

Re: Pipe Break Appearance in IDW

MikeKovacik4928 — Thu, 01 Feb 2018 09:49:45 GMT

Thanks Kelly

I have added my image and my votes to those 2 ideas

Mike

Re: Pipe Break Appearance in IDW

MikeKovacik4928 — Sun, 04 Feb 2018 12:50:00 GMT

Autodesk,

I got this message from Autodesk on a no reply address

I got the answer, not the one I needed though!

It is not possible in the current versions, but 2 ideas with lots of votes have already been submitted years ago and not implemented.

Not possibe to mark as an accepted solution, because there isn't one.

This was more a discussion, rather than a question requiring an answer, so this email is actually not applicable in this case,

which is why in these cases I ignore them.

Mike Kovacik

Re: Pipe Break Appearance in IDW

Xun.Zhang — Mon, 05 Feb 2018 01:03:15 GMT

Hi @swalton,

Sorry for late response, checked with idea status, it seems was tracked already. There is a process to escalate the priority, so please stay tuned.

Thanks!

Re: Pipe Break Appearance in IDW

Anonymous — Tue, 06 Aug 2019 23:22:32 GMT

Hi Xun Z,

Do you know if this modification can be done through the API coding? I'm working on this kind of piping drawings and I need to have the END PIPE symbol instead of the straight break line symbol.

Thanks in advance,

Sam

Re: Pipe Break Appearance in IDW

lnsn — Fri, 23 Aug 2024 13:48:30 GMT

It´s been a few years now since this discussion started... Is there any news on the pipe-cut feature discussed above?

Re: Pipe Break Appearance in IDW

CGBenner — Fri, 23 Aug 2024 13:57:03 GMT

@dan_szymanski this one seems to have been on a roller coaster ride in the Ideas for quite some time. Can we get the Community an update on this one?

@lnsn Thank you for resurfacing this idea.

Re: Pipe Break Appearance in IDW

dan_szymanski — Thu, 29 Aug 2024 14:58:04 GMT

Hi everyone,

No real update to provide as this request is not currently in our near term plans for consideration. The Idea for it can be viewed here: 'S' shaped broken view for shafts and it currently resides within the Top 20 non-implemented Ideas on the board. That is all I can share at this time.