topic Re: Inventor 2017 Twist A Fin Weldment Part Modeling in Inventor Forum

Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:35:18 GMT

hello you all,

i am luc and i am a Student from The Netherlands. i am having a hard time find out how to make this disperse. can any of you guys help me?

kelly.young has edited your subject line for clarity: twist a fin

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

mcgyvr — Mon, 11 Jun 2018 18:35:50 GMT

In the real world that is 3 parts welded together..

I assume you are having trouble with the bottom "twisted" part..

Have you completed the other 2 pieces? The acorn nut and the piece below that already?

If so please attach them (due to a bug you need to zip them up as you can't directly attach ipt files now) so we have something to reference for proper scale..

Also as Inventor is not fully backwards compatible please state the version of Inventor you are using so that if someone provides you a file you can actually open it..

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:48:41 GMT

thanks for the fast reaction. i dont have de top part ready yet. i wil make them first!

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

IgorMir — Mon, 11 Jun 2018 18:49:08 GMT

Hello Luc,

Here is a very quick attempt of mine. Please see the attached file. The model is in IV2018 format.

The other two parts are pretty straight forward, I hope.

Cheers,

Igor.

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:49:28 GMT

Thanks for helping me out!!! but i cant open your file.

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

mcgyvr — Mon, 11 Jun 2018 18:49:44 GMT

@Anonymous wrote:

Thanks for helping me out!!! but i cant open your file.

Because you have Inventor version ______ ( please fill in the blanks and see my comment above about stating your Inventor version)

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:50:09 GMT

my inventor version is 2017

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

IgorMir — Mon, 11 Jun 2018 18:50:29 GMT

Here is a screen shot of the part. It is not the same as an actual part but might give you an idea.

Cheers,

Igor.

@Anonymous wrote:

Thanks for helping me out!!! but i cant open your file.

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:50:47 GMT

Thanks man. i am going to try it now! cheers

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:51:24 GMT

Dear Igor,

This is where i get stuck. am i on the right track?

kelly.young has embedded your image for clarity.

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

IgorMir — Mon, 11 Jun 2018 18:51:47 GMT

No, not really... If you get IV2018 at your school - it would be easier for you to have a look at the file I sent earlier.

@Anonymous wrote:

Dear Igor,

This is where i get stuck. am i on the right track?

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:52:35 GMT

dear Igor,

i instald inventor 2018 an saw your model. i am getting stuck on the stitching part

kelly.young has embedded your images for clarity.

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

IgorMir — Mon, 11 Jun 2018 18:54:22 GMT

Hi Luc,

Here is a folder with screen shots of every step taken to model the item. I hope - it will help. From your screen shots I can tell your sketches are not fully constrained. That's not a good start in Inventor. Please talk to your lecturer and get it sorted first. Before diving into a deep end of Inventor modeling.

Cheers,

Igor.

@Anonymous wrote:

dear Igor,

i instald inventor 2018 an saw your model. i am getting stuck on the stitching part

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

IgorMir — Mon, 11 Jun 2018 18:54:47 GMT

Hi Luc,

Here is more or less a final model for the fan. Please see the attached. In there the model represented in two stages. Flat Pattern, ready to get cut on laser cutting machine and in a final form. That's what using iParts can do for you. With iParts you can create a whole family of parts as needed. But for now - do concentrate on fundamental stuff. Fully constrained sketches are one of them.

Cheers,

Igor.

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:55:14 GMT

Thanks for making time for me. Very much appreciated !!!!!!!!!!!!!!!!!!!!!

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

Anonymous — Mon, 11 Jun 2018 18:55:37 GMT

dear Igor,

i got this far. the only thing i cant figure out is to change te directions of the fins.(When i change th angle the hole model messes up) How do i fix it ?

Thanks,

Luc Mulder

Re: Inventor 2017 Twist A Fin Weldment Part Modeling

IgorMir — Tue, 12 Jun 2018 04:05:50 GMT

Hi Luc,

I don't know. I have changed the dimension d6 to 330° and got the blades in reverse.

Cheers,

Igor.

@Anonymous wrote:

dear Igor,

i got this far. the only thing i cant figure out is to change te directions of the fins.(When i change th angle the hole model messes up) How do i fix it ?

Thanks,

Luc Mulder