topic Re: Rendering problems: section view in Inventor Forum

Rendering problems: section view

Anonymous — Sat, 08 Sep 2018 14:10:48 GMT

Hello,

I try to render an assembly in section view. A few areas are shown correct in the rendered picture. But some are invisible.

Does anyone know how i can fix that?

Thank you for help,

Chris

Re: Rendering problems: section view

Xun.Zhang — Mon, 10 Sep 2018 05:48:16 GMT

Hello @Anonymous,

This is a known problem and addressed by ticket INVGEN-12465 inside.

How about leverage the section view rendering in presentation environment?

Hope it helps!

Re: Rendering problems: section view

Anonymous — Mon, 10 Sep 2018 14:43:05 GMT

I see bolts, elements that are interfering by default. Visuals don't like interfering elements. Does it work if you replace with non-interfering parts ?

Re: Rendering problems: section view

Anonymous — Mon, 10 Sep 2018 21:22:52 GMT

@Anonymous wrote:
I see bolts, elements that are interfering by default. Visuals don't like interfering elements. Does it work if you replace with non-interfering parts ?

No, that doesn't work. In some views you can see through the right inner bearing ring. In other views like here it is visible.

Re: Rendering problems: section view

Anonymous — Mon, 10 Sep 2018 21:25:36 GMT

@Xun.Zhang wrote:
Hello @Anonymous,
This is a known problem and addressed by ticket INVGEN-12465 inside.
How about leverage the section view rendering in presentation environment?
Hope it helps!

Thank you for your answer. What is an presentation eviroment? The different light enviroments which can be choosen?

Re: Rendering problems: section view

swalton — Mon, 10 Sep 2018 21:49:36 GMT

The Inventor Presentation environment is another file where you can create animations and/or exploded views to help document your assemblies.

See: http://help.autodesk.com/view/INVNTOR/2019/ENU/?guid=GUID-F4F6F136-003C-4D1C-9EC1-81102BADC867

Re: Rendering problems: section view

swalton — Mon, 10 Sep 2018 21:53:43 GMT

You might have better luck if you create an assembly-cut feature to get your section view. That should not have the gap in the surface that you are seeing with the section-view tool.

If you don't want a bunch of assembly cuts in your design assembly, create a "rendering" assembly. The rendering assembly has your design assembly as its only component. Define all your cuts, lighting, etc in the rendering assembly and keep your design assembly uncluttered.

Re: Rendering problems: section view

Anonymous — Tue, 02 Oct 2018 15:36:41 GMT

Finally i got it.

Thank you a lot.

Re: Rendering problems: section view

timdown73 — Mon, 28 Oct 2019 13:23:45 GMT

Hello, I'm having the same problem with section views not capping solids in rendered views. Has this issue been fixed yet?

Re: Rendering problems: section view

johnsonshiue — Mon, 28 Oct 2019 20:15:46 GMT

Hi Tim,

I could be wrong but I vaguely remember a similar issue got fixed in one of the updates. What Inventor release are you on? Have you applied all the applicable updates?

Many thanks!