topic Re: FRONT VIEW in Inventor Forum

FRONT VIEW

Anonymous — Wed, 19 Sep 2018 11:20:48 GMT

Hi Everyone,

I was curious, is there a way to set the cube views at initial sketch creation so I don't have to change it every time I start a drawing. I always start in plan view but inventor calls it the front. When looking down the Z axis you are looking from the top or the bottom not the front.

I know this is trivial but I was thinking about it this morning.

Re: FRONT VIEW

Lewis.Young — Wed, 19 Sep 2018 11:30:45 GMT

I think it's just because Inventor will use the Y-axis as the up direction by default.

If you want to consistently use the z-axis as up, you can open up your template, re-align the viewcube by setting "Current View As" and changing which way the front face is so that z points up.

I'd also change the home view too, otherwise it'll stay as it was before.

Lewis Young
Windows 7 x64 - 32GB Ram
Intel Xeon E5-1620 v2 @ 3.70GHz
nVidia Quadro M2000 - 4GB
Inventor Professional 2017.3
Vault Basic 2017
3ds Max 2018

Re: FRONT VIEW

Anonymous — Wed, 19 Sep 2018 11:40:49 GMT

Thanks!!!

Re: FRONT VIEW

Mark.Lancaster — Wed, 19 Sep 2018 11:49:54 GMT

@Anonymous

Another way is to orient the model the way you want and then right mouse click and select create drawing.

From there it will create the base view as that orientation.