topic Re: Split Table Issues in Inventor Forum

Split Table Issues

harvey3ELEA — Fri, 17 May 2024 12:02:24 GMT

Any suggestions as to why my split parts list table keeps rearranging/splitting itself randomly between Inventor sessions? Table arrangement worked well yesterday, but upon opening the drawing this morning, it has gone haywire.

It's roughly 60 entries that won't fit my 11x17 landscape drawing format, thus the need for the split.

It's proving to be a PITA to keep un-splitting/re-splitting it get it back to its proper form.

Re: Split Table Issues

johnsonshiue — Fri, 17 May 2024 22:06:05 GMT

Hi! Could you check the file modified date and time? Is it the time you saved the file last time?

Are there other users editing the files at the same time? Where are the files stored? One Drive?

Many thanks!

Re: Split Table Issues

harvey3ELEA — Wed, 28 Aug 2024 11:50:34 GMT

@johnsonshiue

Upon revisiting this split table randomly unformatting itself (unsplitting):

- no other users accessing this IDW or its models

- files stored on an in-house server with a dedicated partition (for all of our CAD work)

- modified date and time doesn't seem to be tied to the issue

Odd thing is, the 2nd column of the original split table remains in place atop of the sheet where placed (I'll post a picture when it happens again).

Re: Split Table Issues

johnsonshiue — Wed, 28 Aug 2024 21:10:08 GMT

Hi! I will need to see an example of such random split table behavior. It does not sound right to me.

Many thanks!

Re: Split Table Issues

harvey3ELEA — Fri, 20 Sep 2024 14:45:10 GMT

@johnsonshiue

Johnson,

Here's an example of a split table that just rearranged itself. The part #'s are still in the correct sort order, but the table decide to randomly split itself after the 73-m001 part.

The correct table had the longer portion to the left at the drawing's inception.

Harvey

Re: Split Table Issues

harvey3ELEA — Fri, 20 Sep 2024 15:10:57 GMT

@johnsonshiue

And another one (different drawing)...

This one rejoined (unsplit) the long table to the left and off the drawing sheet (as it was originally placed), lost the split to the right, yet kept the right-hand column heading in place. Strange.

Re: Split Table Issues

johnsonshiue — Fri, 20 Sep 2024 20:57:54 GMT

Hi Harvey,

Please share the Inventor files in zip with me johnson.shiue@autodesk.com directly. I would like to understand the behavior better.

Many thanks!

Re: Split Table Issues

harvey3ELEA — Mon, 23 Sep 2024 11:47:23 GMT

Don't think I'll be allowed to release the drawings and assemblies, but I'll check.

Funny thing is, I have opened both of those drawing numerous times over the last couple of months and the split table worked properly up until the other day when both were opened in the states you see above.

Can't figure out if part changes, additions, or subtractions are causing these anomalies.

Re: Split Table Issues

andrewiv — Mon, 23 Sep 2024 15:37:13 GMT

I have to ask if there is a reason that you are using split table? When you split the table it basically keeps the two tables a separate entities that can be manipulated individually and maybe that's what you want. The method I have always used is to edit the parts list, right click on what I want to be the last row and select "Wrap Table at Row". This will accomplish something similar to splitting the table, but it will still behave as one entity and ensure that the two tables are connected. You can wrap tables to the left or to the right by going into the table layout window.

Re: Split Table Issues

harvey3ELEA — Mon, 23 Sep 2024 15:47:06 GMT

Thanks, Andrew. Never really paid much attention to that option as the split table has always been good enough, but I like your method better (as long as it keeps the formatting)!

Using your method, is there any way to create a small gap between the two lists to show some distinction between them?

Re: Split Table Issues

andrewiv — Mon, 23 Sep 2024 15:51:21 GMT

Not that I know of. Part of the reason I like it is I like the tables to share a border and I don't have to drag the second table by hand to match them up.

Re: Split Table Issues

harvey3ELEA — Mon, 23 Sep 2024 15:57:01 GMT

Thanks again. Looks like your method is superior, and I agree about keeping the part list as one entity for editing and moving around the sheet.

Looks like the right way to go to avoid my periodic split table quirkiness too.

All that time where I've seen that, but never bothered to investigate it. This old dog has learned a new trick!