topic Re: Using a library for Inventor in Inventor Forum

Using a library for Inventor

tak.fujiwara — Tue, 09 Apr 2019 12:41:55 GMT

I would like to use the vacuum flange library such as "JIS_JPI_Piping_Content_Pack_JN_V1.1_2019" for my Inventor. But, this is not compatible to Inventor. Do you have a similar products ready for the Inventor?

Re: Using a library for Inventor

Xun.Zhang — Thu, 11 Apr 2019 07:27:57 GMT

Howdy @tak.fujiwara I see that you are visiting as a new member to the Inventor Forum.
Welcome to the Autodesk Community!

It is unclear for me about the library, are you talking about content center library?

Thanks!

Re: Using a library for Inventor

johnsonshiue — Thu, 11 Apr 2019 20:55:28 GMT

Hi Tak,

I believe you are talking about Content Center Library, right? I am not sure if such content is available for Inventor. I need to check with the project team.

Many thanks!

Re: Using a library for Inventor

Frederick_Law — Thu, 11 Apr 2019 21:38:36 GMT

This?

Re: Using a library for Inventor

Anonymous — Fri, 12 Apr 2019 00:51:49 GMT

Yes, that's what I want to use inside my Inventor. The Help Deak simply told that you cannot use it on Inventor. If you have any idea how to convert into a usable format or library, let me know. Thanks!

Re: Using a library for Inventor

jan_priban — Fri, 12 Apr 2019 11:18:32 GMT

Hi,

All Tube&Pipe stuff (pipes, elbows ...) is stored in Content Center libraries. Currently we have 3 predefined JIS T&P styles . User can create/modify T&P style to achieve style he needs. Means he can define T&P style based on pipes, elbows from Content Center. But list of Content Center parts (we use term "families") is given. User can publish own parts/families into Content Center and then use published part in T&P style. But currently there is no transfer guide/wizard from Plant to Inventor (Content Center). You would have to create iParts based on Plant (standard book) definition and publish such parts into Content Center. Finally define new T&P style based on just published part (new families)

Regards

Jan Priban (the Content Center team)