topic Re: How do i rotate a piece that has been fixed on something else? in Inventor Forum https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749558#M185532 <P>Hi, I guess "bigger part" is the part that is fixed in the assembly. If you want to rotate "Arm hand" with respect to "Bigger part", there should not be a restriction between them, maybe this is the restriction that prevents you from turning the part. Check it out by typing "G" and selecting "Arm hand" and try to turn the piece.<BR />I suggest you deactivate the restriction between both parties, turn "Am hand" as you need, then edit the restriction correctly deactivate and finally activate it again (or if it seems complex, first remove the restriction turn part and place a new restriction)<BR />I hope you can solve your problem.</P> Wed, 24 Apr 2019 09:14:42 GMT Sergio.D.Suárez 2019-04-24T09:14:42Z How do i rotate a piece that has been fixed on something else? https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749531#M185531 <P>Hello Autodesk Community!</P> <P>&nbsp;</P> <P>I have 2 pieces in which they already stuck together by using the constraint command.</P> <P>I would like to rotate the 'arm hand' around while it is being attached on to the bigger part.</P> <P>Please refer to the screenshot below.&nbsp;</P> <P>&nbsp;</P> <P>Thank You in Advance!</P> Wed, 24 Apr 2019 09:01:13 GMT https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749531#M185531 Anonymous 2019-04-24T09:01:13Z Re: How do i rotate a piece that has been fixed on something else? https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749558#M185532 <P>Hi, I guess "bigger part" is the part that is fixed in the assembly. If you want to rotate "Arm hand" with respect to "Bigger part", there should not be a restriction between them, maybe this is the restriction that prevents you from turning the part. Check it out by typing "G" and selecting "Arm hand" and try to turn the piece.<BR />I suggest you deactivate the restriction between both parties, turn "Am hand" as you need, then edit the restriction correctly deactivate and finally activate it again (or if it seems complex, first remove the restriction turn part and place a new restriction)<BR />I hope you can solve your problem.</P> Wed, 24 Apr 2019 09:14:42 GMT https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749558#M185532 Sergio.D.Suárez 2019-04-24T09:14:42Z Re: How do i rotate a piece that has been fixed on something else? https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749563#M185533 <P>I see. Thank you for your advice. I have already tried but to no avail it didn't get the job done.</P> <P>When i typed G, it just spun around wildly and made things even more difficult to rotate it about the 'bigger part'.</P> Wed, 24 Apr 2019 09:18:26 GMT https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749563#M185533 Anonymous 2019-04-24T09:18:26Z Re: How do i rotate a piece that has been fixed on something else? https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749599#M185534 <P>If it is complicated, if possible, attach your file here so we all investigate it.</P> Wed, 24 Apr 2019 09:35:00 GMT https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749599#M185534 Sergio.D.Suárez 2019-04-24T09:35:00Z Re: How do i rotate a piece that has been fixed on something else? https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749603#M185535 <P>Thank You Very Much</P> Wed, 24 Apr 2019 09:38:42 GMT https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8749603#M185535 Anonymous 2019-04-24T09:38:42Z Re: How do i rotate a piece that has been fixed on something else? https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8751234#M185536 <P>Hi! You only attach iam file. Please attach all ipt files.</P> <P>Many thanks!<BR /><BR /></P> Wed, 24 Apr 2019 19:57:54 GMT https://forums.autodesk.com/t5/inventor-forum/how-do-i-rotate-a-piece-that-has-been-fixed-on-something-else/m-p/8751234#M185536 johnsonshiue 2019-04-24T19:57:54Z