topic Re: Mirrir Pattern in Inventor Forum

Mirrir Pattern

lkirit2000 — Mon, 06 May 2019 00:53:36 GMT

Please see the attached image , the slots in the below are mirrored from top. Once dimensions are updated from top edge of source slots, the mirrored sketches haven't been updated !

Please let me know what went wrong ?

Rgds

Re: Mirrir Pattern

Xun.Zhang — Mon, 06 May 2019 01:28:29 GMT

Hello @lkirit2000,

Have you checked the Rebuild all firstly?

Upload the part please.

Re: Mirrir Pattern

lkirit2000 — Mon, 06 May 2019 01:43:09 GMT

Hi Xun,

I have refreshed but not working.

I sent the part to your e-mail address.

Rgds

Kiri

Re: Mirrir Pattern

Xun.Zhang — Mon, 06 May 2019 02:09:42 GMT

Hello Loganathan,

I don't see mirror constraint at all, are you sure you have apply the mirror constraint before?

Re: Mirrir Pattern

johnsonshiue — Mon, 06 May 2019 20:55:11 GMT

Hi! Make sure you click the Update button after you make the change in the parameter or the sketch. Another possibility is related to Derive not properly pushing the change from source to derived part. You will need to install 2019.4 to have the fix.

Many thanks!

Re: Mirrir Pattern

lkirit2000 — Tue, 07 May 2019 01:03:54 GMT

Hi Johnson,

Thanks for your response. I am going to install 2020 version soon.

Is it fixed in Inventor 2020 ?

Rgds

Re: Mirrir Pattern

johnsonshiue — Tue, 07 May 2019 20:42:39 GMT

Hi! The derive update issue will be fixed in 2020.1 (like in 2019.4). But, I am not sure if your issue is the same. Could you share the file here?

Many thanks!