topic Re: how to position this part at a specific degree in Inventor Forum

how to position this part at a specific degree

JulieTang — Thu, 20 Jun 2024 15:01:19 GMT

Hi all, i drew this part and i'm having trouble figuring out how to position it at a certain angle, right now if you look at the top view it is straight. how can i make it so that it is slanted at upwards a little to about 5 deg

Re: how to position this part at a specific degree

3DAli — Thu, 20 Jun 2024 18:03:20 GMT

@JulieTang

Hi,

if you want the part to be rotated, you have three options:

1- start your sketch on a work plane that is rotated to your spec

2-use Direct Edit command and rotate the solid/faces whichever way you like

3-use Move Boies command to move/rotate around any axis you want

Also, you can position the part in an assembly, if applicable, so how its modeled is irrelevant to how it's assembled, you can use constraints in an assembly to properly orient the part as desired.

Hope this helps

Ali

Re: how to position this part at a specific degree

kacper.suchomski — Fri, 21 Jun 2024 09:15:40 GMT

(view in My Videos)