topic Re: Drawing Representation not correct in Inventor Forum

Drawing Representation not correct

Anonymous — Wed, 25 Sep 2019 16:21:33 GMT

I am using Inventor 2019. If I select the representation in my model, the model shows the correct representation of my assembly. However, when I add a view to my drawing and select the same representation, I get an extra part in my view. Any suggestions?

Re: Drawing Representation not correct

Mark.Lancaster — Wed, 25 Sep 2019 16:40:09 GMT

@Anonymous

Are you talking about a LOD, View, or Positional representation?

Re: Drawing Representation not correct

Anonymous — Wed, 25 Sep 2019 16:49:28 GMT

View

Re: Drawing Representation not correct

Sergio.D.Suárez — Wed, 25 Sep 2019 16:54:45 GMT

Hi, could you attach some descriptive images of the problem?

Re: Drawing Representation not correct

Cadmanto — Wed, 25 Sep 2019 17:04:19 GMT

Does this thread speak to your issue?

https://forums.autodesk.com/t5/inventor-forum/view-representations-do-not-update-in-drawings/td-p/5810015

Windows 10 x64 -16GB Ram
Intel i7-6700 @ 3.41ghz
nVidia GTS 250 - 1 GB
Inventor Pro 2020

Re: Drawing Representation not correct

Anonymous — Wed, 25 Sep 2019 18:31:09 GMT

I tried that but it did not change anything. All I want is the bracket. The model shows the bracket only but the view adds in a second bracket. To fix it, I had to select the view from the drawing tree and turn the visibility off of the second bracket.

Re: Drawing Representation not correct

SBix26 — Wed, 25 Sep 2019 22:02:18 GMT

If you were able to do that in the drawing (select the bracket and turn off visibility), then your drawing view is not associatively linked to the model View Rep. Edit your drawing view and check the Associative (link) box, OK. Now the model view rep controls the visibility, and you are no longer able to change it in the drawing.

Sam B
Inventor Pro 2020.1.1 | Windows 7 SP1
LinkedIn

Re: Drawing Representation not correct

johnsonshiue — Wed, 25 Sep 2019 22:27:06 GMT

Hi! The behavior does not sound right to me. It could be Design View corruption or bad bodies exclusion or pre-existing interference. Please share the files here so form experts can take a look further.

Many thanks!