topic Re: 2 Breakout on one part = strange behviour in Inventor Forum

2 Breakout on one part = strange behviour

Paul-Mason — Tue, 07 Apr 2020 14:48:10 GMT

IN all the years that I've used Inventor I have never come across this strange behaviour

I'm creating two breakout on one part at differing depths. The first image show the CORRECT position of the first breakout and the second image shows what happens when I create the second breakout i.e. the fist breakout flips place from the top of the part, where I what it, to the bottom of the part the second breakout come in in the correct position there is NO OVERLAP in the two separate sketches.

First breakout in CORRECT position and sketch for second breakout

Second Breakout with first brekout in WRONG MIRROWED position

The results when creating the second breakout, flipping/mirroring the first in the WRONG position

I know the hatching is wrong I've not edited the angle in the shots.

Re: 2 Breakout on one part = strange behviour

kelly.young — Tue, 07 Apr 2020 19:57:42 GMT

Hello @Paul-Mason not sure what is going on there, can you remove any IP from the parts and attach for us to test? If there is something wrong we can escalate to development to investigate further.

Please select the Accept Solution button if a post solves your issue or answers your question.

Re: 2 Breakout on one part = strange behviour

Paul-Mason — Tue, 07 Apr 2020 20:39:31 GMT

@ kelly.young

Here's the ipt and idw files

Re: 2 Breakout on one part = strange behviour

kelly.young — Tue, 07 Apr 2020 22:35:53 GMT

@Paul-Mason I wasn't able to recreate from the files within 2020.2.2 or see anything strange going on, but not exactly sure where the Break Out's are. If you have another .idw showing it in the bad state, please attach that too.

Re: 2 Breakout on one part = strange behviour

johnsonshiue — Tue, 07 Apr 2020 23:58:30 GMT

Hi Paul,

I cannot seem to reproduce it. Could you share the file with the section view flipped?

Many thanks!

Re: 2 Breakout on one part = strange behviour

lena.talkhina — Fri, 08 May 2020 10:53:40 GMT

Hello @Paul-Mason !

Great to see you here on Inventor forum.

I see one answered request from @johnsonshiue . I am wonder if you already found solution without our assistance.

Do you mind to provide more information with us?

Thank you!