topic Re: Model Data empty in BOM in Inventor Forum

Model Data empty in BOM

Formsprag — Thu, 14 May 2020 14:36:10 GMT

Has anyone ever seen this? Nothing showing up in "Model Data" or "Structured", it seems to be fine in the "Parts Only" tab. Any help here would be great!

Inventor 2020.2.1

Re: Model Data empty in BOM

johnsonshiue — Fri, 17 Apr 2020 03:36:10 GMT

Hi! This does not look right. Is Express mode enabled? Try this. Go to Manage -> Rebuild All. Activate LOD: All Comp Suppressed and then activate LOD: Master. Go to BOM table. Does it work better now? If not, please share the files here or send them (zipped) to me directly (johnson.shiue@autodesk.com).

Many thanks!

Re: Model Data empty in BOM

Formsprag — Fri, 17 Apr 2020 13:06:17 GMT

Email sent

Re: Model Data empty in BOM

johnsonshiue — Fri, 17 Apr 2020 22:02:20 GMT

Hi! Many thanks for sharing the files with me! I am not going over the detail of the files. But, I will share what might be the issue and how to fix it. It seems that one subassembly is corrupted. The BOM data was incomplete. The solution is to promote or demote the components out of the original subassembly. Then the BOM data will come back.

This is definitely a bug. It is probably due to migration or copy design. It is unclear to me how it happened. If you find out how to reproduce it, please let us know asap.

Thanks again!

Re: Model Data empty in BOM

karthur1 — Tue, 16 Jun 2020 12:40:30 GMT

Ran across the exact same issue today with a weldment .iam (empty BOM model data). All parts and the iam was built with 2020. No migration or Copy Design. Not exactly sure how this happened, but it took a while to demote/promote. After doing that the model data was there like it should have been in the first place.

BTW, I first tried to toggle the LOD from Master to All Comp Suppressed, but that did not bring back the model data. Had to demote/promote.

2020.3

Re: Model Data empty in BOM

didr1234 — Mon, 16 Nov 2020 15:14:16 GMT

in my assembly there was a part that, in the browser, was shown as an assembly. Once deleted it the bom showed up correctly.

I had to re-insert it and then the icon was correct and the bom as well.

Re: Model Data empty in BOM

johnsonshiue — Mon, 16 Nov 2020 20:26:16 GMT

Hi Diego,

This is absolutely a bug. If you happen to find out how the assembly got into this state, please let us know asap.

Many thanks!

Re: Model Data empty in BOM

iforma — Tue, 08 Dec 2020 16:19:17 GMT

I have the same problem with my files. The files was created by Copy Design.

Top assembly is 50-A-0015936 in attachment.

My coleague created them by Copy Design and he exchanged some parts in assembly. The model has no data in Bills of material and then this bug make issue with BOM on Item in VAULT.

Thx.

Martin Foral

@johnsonshiue

Re: Model Data empty in BOM

johnsonshiue — Thu, 10 Dec 2020 01:38:44 GMT

Hi Martin,

Many thanks for sharing the files! Indeed, the behavior is exactly the same as the original thread. You mentioned that you used Vault Copy Design. Did you use default settings or only some of the files are copied over?

Thanks again!

Re: Model Data empty in BOM

iforma — Thu, 10 Dec 2020 10:55:41 GMT

Hi,

my coleague said he had used copy design for whole assembly where he re-used all of parts. Then he went into Inventor and exchanged the sheet part and DIN bar part. Sheet part was used from next copy design of sheet part (the reason was he didnt have to do new drawing for sheet where was only a few changes).

We use Inventor 2020.3 and I dont know about another issue with assemblies yet

Thx.

Re: Model Data empty in BOM

kpalumbo — Fri, 05 Feb 2021 12:04:09 GMT

To do copy design to save time wonderful BUT to use it & then fail, having to figure out a fix....oh well there goes the time saved. If it a BUG, pls fix it.!

Re: Model Data empty in BOM

iforma — Fri, 05 Feb 2021 13:08:03 GMT

Any new information? Please.

Thx.

Re: Model Data empty in BOM

johnsonshiue — Sat, 06 Feb 2021 01:42:56 GMT

Hi! I am sorry I don't have any update on this issue. Let me take a closer look.

Many thanks!

Re: Model Data empty in BOM

christian.speerWRSEZ — Mon, 16 Aug 2021 11:14:59 GMT

these Problems still exists in Inventor 2021.3.2 with Vault Pro 2021.1
Assemblies created with CopyDesign had these bugs.

To promote/demote is the workaround.

thanks to you!

Re: Model Data empty in BOM

JamesMcMullen — Mon, 16 Aug 2021 19:06:21 GMT

Inside Copy Design, do you have the "Remove BOM Object" option checked?

Re: Model Data empty in BOM

christian.speerWRSEZ — Tue, 17 Aug 2021 06:40:21 GMT

No i didn't checked any of the options.

(Note: we do not use Items here)

Re: Model Data empty in BOM

MairA_DUKA — Wed, 28 Sep 2022 08:02:53 GMT

Hello

Our technical office had the same problem yesterday.

The designer explained to me that in Vault he copied an assembly using "Copy design" and during the copying process he replaced a subassembly with a part.

At the end of the copying process, he had the error that in Inventor was missing the model data in the BOM.

We use Vault Professional 2021.3.1 with Inventor Professional 2021.4.3

Re: Model Data empty in BOM

johnsonshiue — Mon, 03 Oct 2022 18:02:11 GMT

Hi! I believe there is a bug in Inventor & Vault Copy Design causing the behavior to happen. If you know the exact workflow leading to the corruption, please share the files and the steps with me directly johnson.shiue@autodesk.com. I can work with the project teams to understand it better.

In the meantime, please take a look at my reply #4 above to repair the corrupted files.

Many thanks!

Re: Model Data empty in BOM

MairA_DUKA — Thu, 06 Oct 2022 06:42:56 GMT

Hi! Unfortunately I can't send you any more files because our draftsmen have already fixed the problem.
The problem was with a defective subassembly.

Re: Model Data empty in BOM

mike — Thu, 08 Dec 2022 15:17:48 GMT

I do not know if this is the cause for OP but I have observed this issue when replacing an assembly with a part. As if inventor gets upset from expecting to find an assembly but instead is given a part. Maybe this is the cause? The work around for me has been remove the questionable part and reinsert.