topic Pipe run doesn't move with other subassemblies. in Inventor Forum

Pipe run doesn't move with other subassemblies.

licenses42Q6G — Mon, 12 Aug 2024 19:00:20 GMT

Hello,

I have the same problem I think as this thread.

I created a Pipe run into an assembly. When the parts or subassembly is moving the Pipe run doesn't move with other subassemblies.

did you have the same Issue ?

[Post moved and title modified by CGBenner - 8/12/24]

Re: Pipe run doesn't move with other subassemblies.

CGBenner — Mon, 12 Aug 2024 19:06:07 GMT

@licenses42Q6G

Hello! Welcome to the forum. Can you describe in a little more detail what you are trying to do? Are you saying that the pipe rune does not update when equipment that it is attached to moves?

What version of Inventor are you using?

Re: Pipe run doesn't move with other subassemblies.

ldutkaTUZ58 — Thu, 15 Aug 2024 18:21:32 GMT

Is the item in question toggled "Grounded", yet unconstrained to an assembly feature?? That's my first thought.

Good luck.

Re: Pipe run doesn't move with other subassemblies.

CGBenner — Mon, 19 Aug 2024 12:01:11 GMT

@licenses42Q6G Hello, do you still need help with this question?

Re: Pipe run doesn't move with other subassemblies.

licenses42Q6G — Mon, 19 Aug 2024 12:16:33 GMT

Hello! The pipe run is attached to a subassembly (see the picture). How can I constrain the pipe run to this subassembly? The pipe is modeled using a flexible hose route (3D sketch).

Kind regards !

Mouhcine

Re: Pipe run doesn't move with other subassemblies.

CGBenner — Tue, 20 Aug 2024 11:12:33 GMT

@licenses42Q6G

Hello. It is very difficult to know where the problem is from just a picture. Is it possible for you to share this assembly? Use File\Save As\Pack & Go with the settings below, and then attach the Zip file to a reply here. If you cannot share it publicly, send me a Private Message and I can share my email with you, and you can send it directly to me.