topic Re: Hypoid gear in Inventor Forum

Hypoid gear

efeizollahi777 — Wed, 06 May 2020 16:31:33 GMT

Hello every body.

I want to design hypoid gears in autodesk inventor but in inventor there are just spur gears, worm gear and simple bevel gear. Can enyone help me how to do that in Inventor?

If not please tell let me know if there is a software that I can design hypoid gears.

Thank you so much

Esmaeil Feizollahi

Re: Hypoid gear

Frederick_Law — Wed, 06 May 2020 17:32:36 GMT

https://camnetics.com/index.html

Re: Hypoid gear

efeizollahi777 — Thu, 07 May 2020 18:43:16 GMT

Thank you for your respond Pineapple. I installed geartrax for inventor, it has all typical types of bevel gears for example straight bevel gear, spiral bevel gear, zerol bevel gear. But unfortunately seems it has not Hypoid gear.

If I'm wrong let me know please.

Thank you

Esmaeil Feizollahi

Re: Hypoid gear

Frederick_Law — Thu, 07 May 2020 19:36:49 GMT

If GearTrax don't have it, I don't know where else.

Maybe contact them and ask.

Re: Hypoid gear

johnsonshiue — Thu, 07 May 2020 21:14:13 GMT

Hi! If you can figure out the tool and the path to use, I suppose you will need to use Solid Sweep to make the cut.

Many thanks!

Re: Hypoid gear

al28975 — Thu, 21 May 2020 17:32:03 GMT

https://spiralbevel.com/hypoid

https://www.youtube.com/watch?v=GhFt2qvEAzA&t=44s

Re: Hypoid gear

lena.talkhina — Wed, 27 May 2020 14:04:04 GMT

Hello @efeizollahi777 !

Great to see you here on Inventor Forum.

Did you find a solution?
If yes, please click on the "Accept as Solution" button as then also other community users can easily find and benefit from the information.
If not please don't hesitate to give an update here in your topic so all members know what ́s the progression on your question is and what might be helpful to achieve what you ́re looking for. 🙂