topic Library Configration in Inventor Forum

Library Configration

subhashmecha — Tue, 19 May 2020 20:35:22 GMT

Inventor show error message "You do not have a Read/Write Library configured." while publishing a part to Content Center.

"You do not have a Read/Write Library configured. Please
check your Content Center Configuration and try again."

I work on Vault type environment and ADMS. I created a library under ADMS. But still, I am seeing the same issue.

Any suggestion,

Subhash.

Re: Library Configration

leowarren34 — Tue, 19 May 2020 22:18:31 GMT

Hi @subhashmecha,

Is the library set to Read/Only or Read/Write?

Attach a screen shot.

Re: Library Configration

johnsonshiue — Wed, 20 May 2020 16:46:28 GMT

Hi! You need to create a Read/Write CC library. Close all Inventor files. Go to Get Started -> Projects -> Configure CC Library (the button on the right at the bottom) -> create a new library or include an existing Read/Write library.

Many thanks!