topic Re: Pos. Rep. Pains in Inventor Forum

Pos. Rep. Pains

andrewdroth — Tue, 06 Apr 2021 17:33:24 GMT

I can't figure out what's happening here.
https://knowledge.autodesk.com/community/screencast/63c664fb-b3e6-4c4d-bcb7-720f8c5c8799

Re: Pos. Rep. Pains

johnsonshiue — Tue, 06 Apr 2021 19:29:13 GMT

Hi Andrew,

To access the -2 level PosRep, you will need to enable Flexible flag on the subassembly. PosRep has a colorful history too. Inventor 2021 has addressed quite a few legacy issues. If possible, please share the files with me here or directly johnson.shiue@autodesk.com. I would like to take a look and understand the behavior better. There should be a logical reason to explain the behavior.

Many thanks!

Re: Pos. Rep. Pains

andrewdroth — Tue, 13 Apr 2021 23:26:12 GMT

@johnsonshiue Were you able to reproduce that issue?

Re: Pos. Rep. Pains

johnsonshiue — Wed, 14 Apr 2021 16:31:04 GMT

Hi Andrew,

Did you share the files with me? I don't see any communication in my Inbox. Please share the files with me directly (johnson.shiue@autodesk.com).

Many thanks!

Re: Pos. Rep. Pains

andrewdroth — Thu, 15 Apr 2021 14:38:17 GMT

I sent the pack and go on April 6th, let me know if you didn't get it.

Re: Pos. Rep. Pains

johnsonshiue — Thu, 15 Apr 2021 14:44:55 GMT

Hi Andrew,

I checked my email storage and Inbox. I keep all non-spam emails. But, I really do not see any email from you for past month. Did you send it to johnson.shiue@autodesk.com? Also, if I received the email, I would acknowledge and reply to you. If possible, please send it again.

Many thanks!

Re: Pos. Rep. Pains

andrewdroth — Thu, 15 Apr 2021 16:22:21 GMT

Weird, Would a 31MB Zip file hang it up?

Re: Pos. Rep. Pains

johnsonshiue — Thu, 15 Apr 2021 20:30:39 GMT

Hi Andrew,

Our email system allows up to 50MB attachment. Please send it to me again.

Many thanks!

Re: Pos. Rep. Pains

Anonymous — Fri, 16 Apr 2021 01:52:52 GMT

I do get some strange behavior with the same kinds of workflows and as Johnson said, flexible usually sorts it out. Constraints can conflict and cause this.

Did you try making the assembly flexible to see if it fixes this issue?