topic Re: iLogic Rule Error in Inventor Forum

iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:21:09 GMT

Hello everyone,

I've been using this Rule for about a month now and haven't run into any problems until now. Is there a reason that this same rule works in one part but not another?

Sorry I can't share this file.

Autodesk Inventor Professional 2020
64-Bit Edition
Build: 373, Release: 2020.3.4 - Date: Fri 10/30/2020

Re: iLogic Rule Error

andrewiv — Mon, 26 Apr 2021 18:25:20 GMT

Without seeing the rule it's impossible to tell what the problem might be.

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:34:46 GMT

@andrewiv See the attachments. Or I'll copy it here:

Error in rule: Wetted_Surfaces, in document: 17041FF3.ipt

Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"

and

"System.Runtime.InteropServices.COMException (0x80004005): Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Face.get_Appearance()
at ThisRule.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)"

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:36:32 GMT

Also, here is the Rule:

'code to get the area of each face based on its color
Dim oPartDoc As PartDocument
oPartDoc = ThisApplication.ActiveDocument

Dim oFaces As Faces
oFaces = oPartDoc.ComponentDefinition.SurfaceBodies(1).Faces

Dim Colors As Object
Colors = CreateObject("Scripting.Dictionary")

Dim oFace As Face
For Each oFace In oFaces
    Colors(oFace.Appearance.DisplayName) = Colors(oFace.Appearance.DisplayName) + oFace.Evaluator.Area
Next

For Each Item In Colors
  MessageBox.Show("Color: " & Item & vbLf & "Area: " &Colors(Item) & "cm^2", "Surface Area by Color")
Next

Re: iLogic Rule Error

mcgyvr — Mon, 26 Apr 2021 18:50:17 GMT

Try this.. Tell us the last "Part X" message you see before getting the errror..

Likely makes it to part 3 but lets see..

Probably something bad about one of the faces.. Hard to tell without seeing the file...

You can also throw this at the beginning and see how it does and if there is a face it seems to miss reporting on or whatever.

On Error Resume Next

'code to get the area of each face based on its color Dim oPartDoc As PartDocument oPartDoc = ThisApplication.ActiveDocument MessageBox.Show("Part 1", "Made it") Dim oFaces As Faces oFaces = oPartDoc.ComponentDefinition.SurfaceBodies(1).Faces MessageBox.Show("Part 2", "Made it") Dim Colors As Object Colors = CreateObject("Scripting.Dictionary") MessageBox.Show("Part 3", "Made it") Dim oFace As Face For Each oFace In oFaces Colors(oFace.Appearance.DisplayName) = Colors(oFace.Appearance.DisplayName) + oFace.Evaluator.Area Next MessageBox.Show("Part 4", "Made it") For Each Item In Colors MessageBox.Show("Color: " & Item & vbLf & "Area: " &Colors(Item) & "cm^2", "Surface Area by Color") Next

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:48:12 GMT

Part 3 was the last file before the Error.

Error in rule: mcfyvr, in document: 17041FF3.ipt

Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))

and

System.Runtime.InteropServices.COMException (0x80004005): Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.Face.get_Appearance()
at ThisRule.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:49:44 GMT

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:53:55 GMT

This is the file structure. Are you leaning towards one of the ipt files being the culprit?

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 18:57:07 GMT

There are no "Recovery" errors in the file:

Re: iLogic Rule Error

johnsonshiue — Mon, 26 Apr 2021 19:06:03 GMT

Hi Ethan,

The "oFaces" expression needs to be rewritten as the following.

oFaces = oPartDoc.ComponentDefinition.WorkSurfaces.Item(1).SurfaceBodies.Item(1).Faces

Many thanks!

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 19:07:48 GMT

On "Error Resume Next" worked!!! I tried that for both "Rules". It ran "Part 4" and ran the correct "Surface Area by Color". Very cool! I'm adding that line to my Rule. Thanks man!

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 19:19:49 GMT

@johnsonshiue that did not work. I ran into the same error so I added "On Error Resume Next". It must have run because I didn't receive an error but it didn't display a menu (report).

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 19:22:24 GMT

@johnsonshiue

Here is your rule with the added text in front:

On Error Resume Next
'code to get the area of each face based on its color
Dim oPartDoc As PartDocument
oPartDoc = ThisApplication.ActiveDocument

Dim oFaces As Faces
oFaces = oPartDoc.ComponentDefinition.WorkSurfaces.Item(1).SurfaceBodies(1).Faces
    
Dim Colors As Object
Colors = CreateObject("Scripting.Dictionary")
        
Dim oFace As Face
For Each oFace In oFaces
    Colors(oFace.Appearance.DisplayName) = Colors(oFace.Appearance.DisplayName) + oFace.Evaluator.Area
Next
    
For Each Item In Colors
  MessageBox.Show("Color: " & Item & vbLf & "Area: " &Colors(Item) & "cm^2", "Surface Area by Color")
Next

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 19:24:03 GMT

@johnsonshiue I am willing to try other fixes.

Re: iLogic Rule Error

mcgyvr — Mon, 26 Apr 2021 19:35:30 GMT

@ethan_howardMMXXV wrote:

On "Error Resume Next" worked!!! I tried that for both "Rules". It ran "Part 4" and ran the correct "Surface Area by Color". Very cool! I'm adding that line to my Rule. Thanks man!

@ethan_howardMMXXV WARNING.... All thats doing is hiding the error and letting the rule continue to run.

Its highly likely that one or more faces are erroring out and being excluded from your final results.

You should be able to now see which color isn't being shown in your result messages and then see which faces have that color assigned as potentially give a clue into whats going on with those.

Re: iLogic Rule Error

ethan_howardMMXXV — Mon, 26 Apr 2021 19:42:54 GMT

@mcgyvr there are only two colors and both are showing results. Is there a rule to diagnose the surface causing the error? Or can you only diagnose at the part level? We've narrowed it down to "Part 4" as being the problem. I would think that that is the last part in the history tree.