topic Re: Sort part list by balloon placement? in Inventor Forum

Sort part list by balloon placement?

Anonymous — Tue, 25 May 2021 12:11:54 GMT

I am looking for a good way of sorting partlist from placement of the balloons in big assemblies.

Working with drawings of assemblies containing > 100 parts, using BOM to create part list I end up with a mess of numbers.

Is there any possibility to do re-numbering based on selecting rows or columns of balloons to get a tidy and easy to navigate assembly drawing?

(Without going in and re-numbering manually)

Re: Sort part list by balloon placement?

bradeneuropeArthur — Tue, 25 May 2021 12:37:15 GMT

You can fill it in by hand each time, like.

Place balloon number one and write in the balloon 01

place balloon number two and write in the balloon 02

and so on

Afterwards you can write these balloonings (manual text number) back to the assembly in the partslist.

Regards,

Re: Sort part list by balloon placement?

swalton — Tue, 25 May 2021 13:23:29 GMT

Inventor has always treated the balloon number as an afterthought. By default, it is a sequence number based on the sort order of a Parts List. I am not aware of an automatic workflow that renumbers the balloons based on position in a drawing view.

I'm not using Inventor 2022 yet, but there might be a workflow using Instance Properties. Inventor versions prior to 2022 do not have Instance Properties.

Create a new instance property for each unique component in the assembly.
Number them in any order
Place a parts list and view on the drawing
Create/Edit the Balloon Style to pull the instance property, not the item number
Balloon the view.
Edit each Component's Instance Property to be the number you want
Edit the Parts List to hide the item number and show the instance property
Sort the Parts List with the instance property.

Re: Sort part list by balloon placement?

NigelHay — Tue, 25 May 2021 15:25:16 GMT

We do this currently in brazed sub-assemblies by creating the items list then re-numbering the item number in the items list & sorting the list by item number. This is done so that the operator has the parts sequentially listed in the order that they are assembled into the jig for brazing. It's easy enough with a dozen or so parts but I would not want to do it with an assembly of 100 parts.

Re: Sort part list by balloon placement?

Curtis_W — Wed, 26 May 2021 13:08:41 GMT

Hi @Anonymous

Here is a quick ilogic rule that allows you to pick/select the balloons in the order that you want to renumber, then it renumbers the balloons and pushes the new numbers to the BOM and parts list and resorts the parts list.

It's still going to be a bit tedious to use this for a drawing with a large number of balloons, but it is still probably better than doing it manually.

Unfortunately, I could not find a reliable way to do this with a preselected crossing window... and don't have the time to look into sorting all balloons on the sheet by X,Y coordinates.... but I think that could be done fairly easily. So you might post to the Inventor Customization forum and ask about sorting all balloons on the sheet by their position on the sheet/ X,Ys.

http://forums.autodesk.com/t5/Autodesk-Inventor-Customization/bd-p/120

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

Dim oDoc As DrawingDocument oDoc = ThisApplication.ActiveDocument 'create selection set oSet = oDoc.CreateHighlightSet While True Dim oFoObjeature As Object oObj = ThisApplication.CommandManager.Pick( SelectionFilterEnum.kDrawingBalloonFilter, "Select Balloons (press ESC to continue)") ' If nothing gets selected then we're done If IsNothing(oObj) Then Exit While If TypeOf oObj Is Balloon Then oSet.AddItem(oObj) End If End While 'renumber balloons i = 1 Dim oBalloon As Balloon For Each oBalloon In oSet For Each oBalloonValueSet In oBalloon.BalloonValueSets Dim oDrawingBOMRow As DrawingBOMRow oDrawingBOMRow = oBalloonValueSet.ReferencedRow oBalloon.BalloonValueSets(1).OverrideValue = i Dim oBOMRow As BOMRow oBOMRow = oDrawingBOMRow.BOMRow oBOMRow.ItemNumber = oBalloonValueSet.OverrideValue Next i = i + 1 Next 'resort parts list Dim oPartsList1 As PartsList oPartsList1 = oDoc.ActiveSheet.PartsLists.Item(1) oPartsList1.Sort("ITEM", 1, "DESCRIPTION", 1, "QTY", 1)

Re: Sort part list by balloon placement?

Anonymous — Thu, 27 May 2021 08:13:20 GMT

Not totally automatic, but this iLogic rule simplifies the process quite a lot.

Thank you!

Re: Sort part list by balloon placement?

johan.degreef — Thu, 27 May 2021 08:34:53 GMT

@Anonymous

We just place a partlist, and balloon everything. Than we sort the partlist (check automatically) in a way we like and do a renumber. The balloons on the drawing are not in a nice order, but the partlist is. We don't have much work on updating our drawings this way.

Re: Sort part list by balloon placement?

didier.bonte4U3RJ — Mon, 02 May 2022 14:38:25 GMT

Dear,

Is there an update for Inventor 2022?

I receive an error message on line 43 (last line). Worked perfect in Inventor 2021.

Thx

Re: Sort part list by balloon placement?

cadman777 — Mon, 02 May 2022 15:39:55 GMT

Please post the error message.

You probably will do better in the Customization forum.

A quick guess:

the first thing I would look at is, on line 43 make sure the words in quotes exactly match the spelling in your PartsList.