topic Image File in Title Block Template in Inventor Forum

Image File in Title Block Template

dbyrdJKJBQ — Thu, 27 May 2021 17:54:55 GMT

I'm having an issue with my title block template. There is an image associated with the title block but it is not actually used in the template itself. It is not causing me any issues but I'd really like to get rid of it. The only place I can see it is in the Vault tab under "3rd Party". I am attaching a screen cap of what it looks like. Can anyone help me get rid of this?

Re: Image File in Title Block Template

mcgyvr — Thu, 27 May 2021 18:06:08 GMT

Try this..

Stand on your left foot..
Check the file out of Vault
Go to the "Tools" tab and in the "options" section press the "Links" button
Select the image and "Break" the link
Switch to standing on your right foot and grab your right ear lobe.
In the Inventor vault browser and press the "Refresh Vault Status" button.
Check it back into Vault

Good?

Re: Image File in Title Block Template

dbyrdJKJBQ — Thu, 27 May 2021 18:15:38 GMT

I actually already tried this minus standing on my left foot, maybe that's where it went wrong haha.

Re: Image File in Title Block Template

Chancellor.Kurre — Thu, 27 May 2021 19:10:31 GMT

Instructions unclear. Stuck standing on right foot and holding earlobe 😁

Re: Image File in Title Block Template

bradeneuropeArthur — Thu, 27 May 2021 19:13:19 GMT

What happens if you do the same, but after you have "Saved as" the drawing without checking it into Vault?

Is it then deleted and away?

@dbyrdJKJBQ

Re: Image File in Title Block Template

johnsonshiue — Thu, 27 May 2021 19:37:26 GMT

Hi! Open the drawing file and go to Tools -> Link -> break link.

Many thanks!

Re: Image File in Title Block Template

dbyrdJKJBQ — Fri, 28 May 2021 10:45:49 GMT

Unfortunately this did not work either.

Re: Image File in Title Block Template

dbyrdJKJBQ — Fri, 28 May 2021 10:49:20 GMT

Here is another screen cap of the Links page. The top choice is the only one that will let me click break link, but even after doing so upon reopening the links page everything is still shown and the break link button is not grayed out like the bottom choice here.

Re: Image File in Title Block Template

bradeneuropeArthur — Fri, 28 May 2021 10:51:39 GMT

Also not with save copy as and activate the copy?

Try export to idw.

Then export to dwg again or vice versa.

Re: Image File in Title Block Template

bradeneuropeArthur — Fri, 28 May 2021 10:55:28 GMT

https://forums.autodesk.com/t5/inventor-forum/need-to-delete-a-third-party-image-file-link/m-p/3497248#M438382

Re: Image File in Title Block Template

dbyrdJKJBQ — Wed, 02 Jun 2021 10:40:38 GMT

Nothing suggested has worked, I just created a new title block. Thank you all anyway.