topic Re: AutoCAD 2025 Freeze after Startup screen in Installation & Licensing Forum

AutoCAD 2025 Freeze after Startup screen

he_dawoud — Wed, 08 Jan 2025 15:36:51 GMT

Hi everyone,

I'm experiencing a strange issue with AutoCAD 2025 on my Windows 10 machine. After the initial startup screen disappears, the program freezes for approximately 2 minutes before running smoothly.

I've already taken the following steps to troubleshoot:

Updated System & Drivers: Ensured my Windows 10 is up-to-date and installed the latest drivers for my AMD Radeon RX graphics card.
Clean Install: Performed a clean installation of AutoCAD 2025.
Cleared Temp & Cache: Emptied the temporary files and cache folders.
Reinstalled .NET Framework: Reinstalled the .NET Framework.

Unfortunately, the issue persists. I've also tried AutoCAD 2023 and 2024, and they exhibit the same freezing behavior.

Has anyone else encountered this problem? Any suggestions on how to resolve this would be greatly appreciated.

Thanks in advance,

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Wed, 08 Jan 2025 15:42:03 GMT

Make sure you've downloaded & installed 2025.1.1 update.

Next in AutoCAD try setting GFXDX12 to 0, then close & restart AutoCAD.

If no difference, enter GRAPHICSCONFIG command and select another option under 2d Display Settings.

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Thu, 09 Jan 2025 18:50:39 GMT

Dear Paul Li,

Thanks for the fast replay.

I followed the steps as mentioned but unfortunately the problem still exist. Even freeze time became longer (more than 3 min).

I think I could overcome this issue by installing new windows system.

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Thu, 09 Jan 2025 18:56:48 GMT

After AutoCAD 2025.1.1 finally opens do the following:

Enter at command prompt: GraphicsConfig

Do a screenshot and share the image here.

Also at command prompt enter: ABOUT

Do a screenshot of that as well and share the image here.

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Thu, 09 Jan 2025 21:56:16 GMT

These are the screenshots.. Thanks for following-up

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Thu, 09 Jan 2025 22:19:37 GMT

Your setup is still using Directx12. Enter command Gfxdx12 and set that to 0. Then close and restart AutoCAD. Enter GraphicsConfig command again do a screenshot and share that here .

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Fri, 10 Jan 2025 07:00:51 GMT

DirectX 12 persists due to reverting to default. I've attached screenshots demonstrating alternative settings: Gfxdx12=0 and GraphicsConfig in basic mode.

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Fri, 10 Jan 2025 07:05:04 GMT

any difference with these alternative settings?

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Fri, 10 Jan 2025 07:50:36 GMT

It takes longer time lunch.

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Fri, 10 Jan 2025 15:06:46 GMT

So leaving Autocad setup as Directx11 is the same as Directx12?

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Fri, 10 Jan 2025 18:38:32 GMT

Even it's better to leave it with DirectX12.

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Fri, 10 Jan 2025 18:52:07 GMT

Time to sign into your account and submit a troubleshooting ticket with autodesk

Re: AutoCAD 2025 Freeze after Startup screen

simon_smithV9KAB — Mon, 24 Feb 2025 20:36:28 GMT

Did you come up with a solution to this problem?

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Thu, 27 Feb 2025 04:38:38 GMT

Unfortunately I didn't come up with any solution. I feel the problem caused by windows. I'm pretty sure installing fresh windows will solve this problem 100%.

Re: AutoCAD 2025 Freeze after Startup screen

StinkySally — Fri, 28 Feb 2025 02:17:15 GMT

I found this fixed my problem. It occurred when I upgraded windows 10 to windows 11.

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/SQLDUMPER-EXE-window-opening-and-closing-when-working-in-Revit.html

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Fri, 28 Feb 2025 03:20:33 GMT

Not sure if this applies to AutoCAD and Windows 10:

Re: AutoCAD 2025 Freeze after Startup screen

he_dawoud — Mon, 03 Mar 2025 03:43:52 GMT

Thanks for mention this article. However, I tried this method on AutoCAD and Windows10, but still not solving the issue.

I'm using AutoCAD, and after 20 years of experience, I've never encountered a problem that persists like this one.

Re: AutoCAD 2025 Freeze after Startup screen

paullimapa — Mon, 03 Mar 2025 03:52:15 GMT

Have you tried creating a different Windows user profile with local administrator privileges then sign into Windows using that new account to launch your AutoCAD 2023, 2024 & 2025 to see if that makes a difference?