topic Re: Error in Revit Certificate in Installation & Licensing Forum

Error in Revit Certificate

shefypattambi — Tue, 05 Dec 2017 19:53:18 GMT

Dear Autodesk Support Team,

I got certified by Autodesk on 4-12-2017 by former Autodesk CEO Carl Bass. How can I get a certificate that is signed by the present Autodesk CEO Andrew Anagnost ?

Re: Error in Revit Certificate

Darin.Green — Wed, 06 Dec 2017 05:44:13 GMT

@shefypattambi

UPDATE: Your typed post said "4-12-2017" but the image read "December 4, 2017"

I don't think you can if you were certified back in April. The signature is generally the active CEO at the time of the testing. Although Carl Bass stepped down in February 2017, Andrew Anagnost wasn't appointed until June 2017.

If you insist on looking into this further, you should reach out to Certiport. Also, login to your certiport to see if it was changed...

Hope that helps.

Re: Error in Revit Certificate

shefypattambi — Thu, 07 Dec 2017 06:45:20 GMT

Hi @Darin.Green,

The test was taken on December - 4 - 2017. Thats why I raised this question.

Below is the replay from the Certiport Team and this was their replay.

"I was advised to have you refer back to Autocad's website for further information. We are unsure why the Signature on the certificate is not up to date with the current CEO."

Now I am in the middle of nowhere. This is my full conversation with Certiport Team.

Hii Gaby

Gaby

at 23:31, Dec 5:

Good Afternoon, How may I help you?

You

at 23:31, Dec 5:

Good after noon

You

at 23:31, Dec 5:

Please not my certifcate number as GY9P-4T8h

You

at 23:32, Dec 5:

I got the signature of the former Autodesk CEO signature instead the current CEO signature

Gaby

at 23:33, Dec 5:

Thank you, Just to confirm you tested with Certiport correct?

You

at 23:33, Dec 5:

yes

You

at 23:34, Dec 5:

Test center was at Trichur CADD Center India

Gaby

at 23:35, Dec 5:

Thank you, When did you receive this certification?

You

at 23:35, Dec 5:

yesterday

You

at 23:35, Dec 5:

4-12-2017

Gaby

at 23:36, Dec 5:

Im sorry, What date did you complete this exam?

You

at 23:36, Dec 5:

4-12-2017

Gaby

at 23:37, Dec 5:

Thank you, Please give me a couple of minutes while I access your account.

You

at 23:37, Dec 5:

Hi pls check this url

You

at 23:37, Dec 5:

https://www.youracclaim.com/badges/20a6a334-b376-44fc-98cb-6fecc8b0f24f/public_url

You

at 23:37, Dec 5:

ok thank you

Gaby

at 23:38, Dec 5:

You're welcome

You

at 23:39, Dec 5:

did you got access to my account ?

Gaby

at 23:39, Dec 5:

Please allow me a few more minutes

You

at 23:40, Dec 5:

ok no problem..take your time..i ll be here

Gaby

at 23:40, Dec 5:

Thank you

You

at 23:42, Dec 5:

You're Welcome

Gaby

at 23:46, Dec 5:

Thank you for your patience, I am currently still looking into this for you.

You

at 23:46, Dec 5:

Gaby

at 23:46, Dec 5:

Thank you

You

at 23:49, Dec 5:

This Link May be helpfull for you

You

at 23:49, Dec 5:

https://www.certiport.com/Portal/Pages/PrintTranscriptInfo.aspx?action=Cert&format=pdf&id=360

Gaby

at 23:51, Dec 5:

Thank you

Gaby

at 0:04, Dec 6:

Thank you so much for your patience, I was advised to have you refer back to Autocad's website for further information. We are unsure why the Signature on the certificate is not up to date with the current CEO.

You

at 0:06, Dec 6:

Could you please be more specific. which autodesk website i should refer and what is the purpose ?

You

at 0:07, Dec 6:

If my understanding is correct the system at certiport is controlling all this ..am I right ?

Gaby

at 0:08, Dec 6:

No, We administrate the exams for Autocad. We are unable to make any corrections on the information that is provided by AutoCad on your Certificate.

Gaby

at 0:09, Dec 6:

I apologize, for Auto Desk.

You

at 0:09, Dec 6:

I see..so where should I go

Gaby

at 0:10, Dec 6:

Here is a link to their website.

You

at 0:11, Dec 6:

This link does not say anything that I required

You

at 0:12, Dec 6:

I believe you have the authority to bring this issue to the autodesk team and reissue my certificate.

Gaby

at 0:13, Dec 6:

Unfortunately we are unable to make any corrections regarding what information is provided by AutoDesk.

You

at 0:14, Dec 6:

so you are saying that I can not get a new certificate ?

You

at 0:15, Dec 6:

why dont you try to update the information provided by the Autodesk ?

Gaby

at 0:16, Dec 6:

If you would like a second Certificate with updated information regarding the CEO of AutoDesk. I would recommend you contact AutoDesk for further Assistance.

Gaby

at 0:20, Dec 6:

Is there anything else I can assist you with today?

You

at 0:21, Dec 6:

nop

Re: Error in Revit Certificate

Darin.Green — Thu, 07 Dec 2017 12:02:19 GMT

@shefypattambi

In that case, let's ping @natasha.l to see if she can get this resolved for you.

Re: Error in Revit Certificate

shefypattambi — Thu, 07 Dec 2017 16:50:16 GMT

Hi @Darin.Green

Thank you for your support

Re: Error in Revit Certificate

natasha.l — Thu, 07 Dec 2017 20:02:04 GMT

Hello @shefypattambi,

This is a very specific question that needs some further research on my end. I will try to find out the group that handles this & get back to you if I receive a response.

Thank you for your patience.

Re: Error in Revit Certificate

natasha.l — Thu, 07 Dec 2017 20:16:47 GMT

Hello @shefypattambi,

Please contact this group via email at, certification@autodesk.com with any questions about the program. They should be able to provide you with more information & resolve this for you.

Thank you.

Re: Error in Revit Certificate

shefypattambi — Fri, 08 Dec 2017 10:06:45 GMT

Hi @natasha.l

Thank you. I will update you once I got a response from them.

Re: Error in Revit Certificate

natasha.l — Mon, 18 Dec 2017 17:27:21 GMT

Hello @shefypattambi,

I have followed up with our certification team they have received this request & let me know they will issue you an updated certificate with the proper information.

Autodesk has confirmed with our partners at Certiport that customers who earned certification between June 1, 2017 and December 4, 2017, and requested a printed certificate, will receive an updated certificate executed by Autodesk CEO, Andrew Anagnost.

Thank you for your patience & congratulations on earning your Autodesk product certification!

Please “Accept As Solution” if a reply or replies have helped resolve the issue or answered your question, to help others in the community.

Re: Error in Revit Certificate

shefypattambi — Thu, 14 Dec 2017 04:41:36 GMT

HI @natasha.l,

Thank you for the support, I will close this thread once they issue a new certificate.

Re: Error in Revit Certificate

shefypattambi — Sat, 16 Dec 2017 15:14:21 GMT

Hi @natasha.l @Darin.Green

Thank you for the support. Autodesk issued a new certificate with proper sign..!