topic Betreff: RE: FLEXnet Licensing error in Installation & Licensing Forum

FLEXnet Licensing error

GeorgK — Tue, 19 Dec 2017 15:24:05 GMT

I have downloaded and installed the latest edition v11.13.1.2 Build 173302 x64_n6 on 3 brand new servers running Window 2012 R2. Installed using default suggested path and then started LMTOOLS to create a new service. When i am finished i click "Save Service" and get an error message.

---------------------------
Updating DACL Failed
---------------------------
Service has been created but failed to update the DACL settings of FlexNet Licensing Service. It will give problem for accessing TS features. Check whether FlexNet Licensing Service is correctly installed or not and delete and create this service again
---------------------------
OK
---------------------------

I tried

https://knowledge.autodesk.com/customer-service/network-license-administration/get-ready-network-license/download-the-network-license-manager

https://knowledge.autodesk.com/customer-service/network-license-administration/install-and-configure-network-license/windows/install-the-network-license-manager-windows

https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Update-DACL-failed-when-saving-service-within-LMTOOLS.html

https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/simplecontent/content/updating-dacl-failed.html

https://forums.autodesk.com/t5/installation-licensing/flexnet-licensing-error-15-570/td-p/3061980

https://forums.autodesk.com/t5/installation-licensing/flexnet-licensing-error-15-quot-winsock-operation-would-block/td-p/3272647

Same to mine:

https://forums.autodesk.com/t5/installation-licensing/lmtools-fail-to-set-dacl-on-new-service/td-p/6251949

Is there a solution for the problem?

Thank you Georg

RE: FLEXnet Licensing error

Otto — Tue, 19 Dec 2017 15:25:45 GMT

Hello GeorgK

It looks like you are seeing "Error 15" when registering and activating software or using the Portable License Utility. The following article(s) should help you resolve the problem:

Port numbers for single server FLEXlm setup

Problems registering and activating software or using the Portable License Utility

Checklist for troubleshooting Activation and Licensing issues

Betreff: RE: FLEXnet Licensing error

GeorgK — Tue, 19 Dec 2017 15:42:53 GMT

Hello Otto,

I opened the firewall. The error stays. It´s a network license.

Georg

Betreff: RE: FLEXnet Licensing error

rkmcswain — Tue, 19 Dec 2017 16:15:56 GMT

FYI: "Otto" is a bot. It won't respond.

I seem to recall that error message and moving on. Do you know if it's actually not working?

Have you tested it like this?

http://upandready.typepad.com/up_and_ready/2011/06/verifying-if-license-server-is-up-and-running-and-if-firewall-is-blocking-ports-from-a-client-using-.html

Betreff: RE: FLEXnet Licensing error

GeorgK — Tue, 19 Dec 2017 16:48:16 GMT

The server is responding on port 27000. The only thing which is not working is the "Configuration using Services".

Re: FLEXnet Licensing error

natasha.l — Tue, 19 Dec 2017 19:12:16 GMT

Hello @Anonymous,

Welcome back.

This error is associated with a permissions problem with the debug.log file or an issue with the installation of LMtools. Take a look at, Update DACL failed when saving service within LMTOOLS.

Let us know if you end up resolving this. Thank you.

Please “Accept As Solution” if a reply or replies have helped resolve the issue or answered your question, to help others in the community.

Re: FLEXnet Licensing error

GeorgK — Wed, 20 Dec 2017 07:58:30 GMT

Hello @natasha.l,

this does not solve the problem. I saw this post

https://forums.autodesk.com/t5/installation-licensing/lmtools-fail-to-set-dacl-on-new-service/td-p/6251949

There is a problem with the license manager v11.13.1.2 under Windows 2012R2. But the solution does not work on my side.

Georg

Re: FLEXnet Licensing error

GeorgK — Mon, 08 Jan 2018 17:05:15 GMT

Is there any update in the case?

Re: FLEXnet Licensing error

rkmcswain — Mon, 08 Jan 2018 17:22:38 GMT

@natashal84 wrote:

This error is associated with a permissions problem with the debug.log file or an issue with the installation of LMtools. Take a look at, Update DACL failed when saving service within LMTOOLS.

FYI @natasha.l - I have received this same error on the last 2 or 3 installs that I have performed of the NLM, and there has not been a problem at all. They all work just fine afterwards with no action taken. Posts #8 and #30 in this thread indicate that this message can be ignored (in some cases I suppose).

There are also many other suggestions in this same forum thread, in case you have not seen this @GeorgK

Re: FLEXnet Licensing error

natasha.l — Mon, 08 Jan 2018 18:02:11 GMT

Yes, this is correct this error does not have to do with your Autodesk service in LMtools. This issue is a non-Autodesk issue & has been reported to have no effect on the License Manager serving Autodesk products, if the proper permissions have been adjusted & everything is set up properly.

------------------------------------------------------------------------------------------------------------------------

Hello @Anonymous,

Have you tried to ignore the message? Or check the other services running on the server or license manager?

You can also "ignore" the issue by following the steps below:

Click Ok on the dialog box.
Click Save again.

This time you will not receive the error message.

Go to the Start/Stop/Reread tab
Click Start Server
Verify you have licenses by clicking "Perform Status Enquiry" on the "Server Status" tab.

Please “Accept As Solution” if a reply or replies have helped resolve the issue or answered your question, to help others in the community.

Re: FLEXnet Licensing error

rkmcswain — Mon, 08 Jan 2018 18:08:53 GMT

Thanks @natasha.l - perhaps you can inform the author(s) of the aforementioned KB article so that it can be removed or edited to state what you said above.

Re: FLEXnet Licensing error

Mark.Lancaster — Mon, 08 Jan 2018 18:25:11 GMT

In most cases when this occurs.. Selecting save (saving the service again) as @natasha.l pointed out corrects the issue. But when it doesn't the other articles/work flows listed come into play.

Re: FLEXnet Licensing error

GeorgK — Tue, 09 Jan 2018 06:51:21 GMT

I tried to ignore the message and checked the other services running on the server or license manager.

The license is working only without the service. When I use the service then the license server does not start. It's not a problem with the rigthts. I have an admin account. I tried the different solutions from my first post. But no solution worked.

Why is the problem with the error message not beeing fixed?

Re: FLEXnet Licensing error

natasha.l — Tue, 09 Jan 2018 17:40:54 GMT

Hello @Anonymous,

Can you explain further what you mean by "the license is working only without the service"?

If you can pull licenses then there is a functioning Autodesk license service running & this message is popping up for some other reason. I will escalate this post for you & a support technician will be with you soon.

Thank you.

Re: FLEXnet Licensing error

rkmcswain — Tue, 09 Jan 2018 18:02:29 GMT

@GeorgK - have you opened a support case with Autodesk on this?

Re: FLEXnet Licensing error

natasha.l — Tue, 09 Jan 2018 21:26:39 GMT

Hello Everyone,

Yes, @Anonymous has a support request opened.

GeorgK you should have automatically received the notification & can see the case number posted below your first reply.

Thank you for posting & a support technician will be with you shortly.

Re: FLEXnet Licensing error

GeorgK — Wed, 10 Jan 2018 07:40:35 GMT

Hello @natasha.l,

you can start the licenseserver with or without the service. See number 4:

https://knowledge.autodesk.com/customer-service/network-license-administration/install-and-configure-network-license/windows/configuring-windows-license-server

The licenseserver works on my side without the service. The service is created but could not be started. I delete the service and did uninstalled the licenseserver. With a new installation the error occurs again. No change!