https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6500626#M13629 <P>Thanks Laurens. Created a screencast and uploaded. I'm assuming it went to support.</P> Mon, 15 Aug 2016 14:18:00 GMT Bartlett-Pentagon 2016-08-15T14:18:00Z https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6496835#M13627 <P>I select a machining boundary for horizontal, Generate tool path and everything is fine. I edit operation to adjust (stock to leave etc.), and it fails to generate tool path. I go back to edit, and the original boundary I selected is incorrect. I have to clear the boundary definition and re-select the correct boundary. Then it regenerated fine, but I have &nbsp;to re-select any time i make and edit to the operation. Note, this boundary is from a sketch.</P> Fri, 12 Aug 2016 14:32:13 GMT https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6496835#M13627 Bartlett-Pentagon 2016-08-12T14:32:13Z https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6496968#M13628 <P>Best way to report this is to make a video(See Autodesk Screencast) and send in feedback.</P> Fri, 12 Aug 2016 15:11:53 GMT https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6496968#M13628 Laurens-3DTechDraw 2016-08-12T15:11:53Z https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6500626#M13629 <P>Thanks Laurens. Created a screencast and uploaded. I'm assuming it went to support.</P> Mon, 15 Aug 2016 14:18:00 GMT https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6500626#M13629 Bartlett-Pentagon 2016-08-15T14:18:00Z https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6500641#M13630 <P>&nbsp;</P> <DIV class="iframe-container"><IFRAME src="https://screencast.autodesk.com/Embed/Timeline/30e91f1a-c065-4e12-91a4-0439fdd3701a" width="640" height="650" frameborder="0" scrolling="no" allowfullscreen="allowfullscreen" webkitallowfullscreen="webkitallowfullscreen" style="display: inline;"></IFRAME></DIV> Mon, 15 Aug 2016 14:21:21 GMT https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6500641#M13630 Bartlett-Pentagon 2016-08-15T14:21:21Z https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6520084#M13631 Welcome Steven Shaw ! Wed, 24 Aug 2016 14:32:08 GMT https://forums.autodesk.com/t5/hsm-support-forum/horizontal-cant-remember-machining-boundary-between-adjustments/m-p/6520084#M13631 Bartlett-Pentagon 2016-08-24T14:32:08Z