https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9111173#M9995 <P><a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/5127059">@paul.slaterMZZFE</a>&nbsp;</P> <P>post files are directly not support make sure zip the post file before attaching</P> <P>&nbsp;</P> Sun, 27 Oct 2019 18:02:43 GMT boopathi.sivakumar 2019-10-27T18:02:43Z https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9109216#M9991 <P>AchimN posted in 2018 to Zeljnik2014 and I have followed all the instructions for getting rid of canned cycles in my Siemens 802 Turning post but it is still outputting the N95 CYCLE81(5, 0, 5, -50, ) is there anything else that needs to be set?</P><P>Thanks Paul</P> Fri, 25 Oct 2019 16:51:16 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9109216#M9991 paul.slaterMZZFE 2019-10-25T16:51:16Z https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9109332#M9992 <P>Hi&nbsp;<a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/5127059">@paul.slaterMZZFE</a>&nbsp;, can you share your post.</P><P>Jason</P> Fri, 25 Oct 2019 17:51:19 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9109332#M9992 Anonymous 2019-10-25T17:51:19Z https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9110829#M9993 <P>Jason -sorry for the late reply. i have already tried to post back but got a message to say it was a draft, don't know what i did wrong. I have have inserted the two lines of code that AchimN suggested but it does not work for me, I think I have missed something else. for your ease of finding the area I have put&nbsp; &nbsp;//Jason at the end of the first line of that code. thanks Paul.</P> Sun, 27 Oct 2019 10:00:19 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9110829#M9993 paul.slaterMZZFE 2019-10-27T10:00:19Z https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9110834#M9994 <P>Jason -I don't think the post file attached. Hopefully it is attached this&nbsp;</P> Sun, 27 Oct 2019 10:07:26 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9110834#M9994 paul.slaterMZZFE 2019-10-27T10:07:26Z https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9111173#M9995 <P><a href="https://forums.autodesk.com/t5/user/viewprofilepage/user-id/5127059">@paul.slaterMZZFE</a>&nbsp;</P> <P>post files are directly not support make sure zip the post file before attaching</P> <P>&nbsp;</P> Sun, 27 Oct 2019 18:02:43 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9111173#M9995 boopathi.sivakumar 2019-10-27T18:02:43Z https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9111747#M9996 Thank you. I was wondering what I was doing wrong! Kind regards Paul.<BR /> Mon, 28 Oct 2019 07:59:25 GMT https://forums.autodesk.com/t5/hsm-post-processor-forum/need-to-get-rid-of-drilling-canned-cycle-on-siemens-802-turning/m-p/9111747#M9996 paul.slaterMZZFE 2019-10-28T07:59:25Z