topic Re: Post request for Ace 2 axis lathe Fanuc oitc in HSM Post Processor Forum

Post request for Ace 2 axis lathe Fanuc oitc

craig.e.oconnell — Tue, 12 Nov 2019 01:07:32 GMT

Hi Guys

Hoping some one can help out with a post for a 2 axis Ace lathe LT -2xl 500 as the generic Fanuc post has quite a few issue with our machine

Re: Post request for Ace 2 axis lathe Fanuc oitc

boopathi.sivakumar — Tue, 12 Nov 2019 16:26:59 GMT

@craig.e.oconnell

Attach the difference between the code you wanted and how the fusion is generating we will have a look at it

Re: Post request for Ace 2 axis lathe Fanuc oitc

craig.e.oconnell — Tue, 21 Dec 2021 05:49:05 GMT

Hi Guys

Hoping you can help me with the post processer below .this what fusion is posting for the drill cycle and will not run

%
O1001
N10 G98 G18
N11 G21
N12 G50 S6000
N13 G28 U0.
N14 G28 W0.

(DRILL1)
N15 T0505
N16 G54
N17 M7
N18 G98
N19 G97 S1200 M4
N20 G0 X0. Z15.
N21 G0 Z5.
N22 G81 X0. Z-64. R-29. F100.
N23 G80
N24 Z15.

N25 M9
N26 G28 U0.
N27 G28 W0.
N28 M30
%

And this is what my other software posts and works

%
O0000
N100 G21
(TOOL - 6 OFFSET - 6)
(DRILL 9. DIA.)
N110 G0 T0505
N120 M7
N130 G97 S1000 M03
N140 G0 G54 X0. Z5.
N150 Z2.
N160 G99 G1 Z-36. F.25
N170 G0 Z5.
N180 M9
N190 G28 U0. W0. M05
N200 T0500
N210 M30
%