topic Re: onsrud tech series with b&r controller. in HSM Post Processor Forum

onsrud tech series with b&r controller.

Anonymous — Sun, 01 Dec 2019 19:49:15 GMT

we are looking at switching to fusion 360 for our c.r onsrud tech series cnc router.

our router has a b&r controller. I have attached the post processor we are currently using in visual mill as an example

thanks

Re: onsrud tech series with b&r controller.

boopathi.sivakumar — Mon, 02 Dec 2019 05:59:28 GMT

@Anonymous

make sure zip the file before sending.

Could you please zip the file and attach it here

Re: onsrud tech series with b&r controller.

Anonymous — Mon, 02 Dec 2019 18:02:18 GMT

have attached zip file

Re: onsrud tech series with b&r controller.

boopathi.sivakumar — Tue, 03 Dec 2019 10:58:13 GMT

@Anonymous

I think you can try with the attached post and if you need any modifications you can post here we can help you to sort out the issue

https://cam.autodesk.com/hsmposts?p=cr_onsrud_fanuc_31i

This is a generic post of onsrud series with fanuc controller, I don't see much difference between the codes, so you can give it a try and let me know the feedback

Re: onsrud tech series with b&r controller.

Anonymous — Tue, 03 Dec 2019 18:53:15 GMT

I tried it but it came up error (cnc fault) before even picking up the tool from the holder.

mabe have to be a modified post processor?

Re: onsrud tech series with b&r controller.

boopathi.sivakumar — Tue, 03 Dec 2019 19:06:55 GMT

@Anonymous

Yes it needs modification. If you have any working nc file which is working fine with the machine then attach the nc file here.i will have look at it.

Make sure zip the file before attaching.

Re: onsrud tech series with b&r controller.

Anonymous — Tue, 03 Dec 2019 19:37:09 GMT

a working nc file from the current software we use or for fusion?

Re: onsrud tech series with b&r controller.

boopathi.sivakumar — Wed, 04 Dec 2019 01:47:00 GMT

Yes working file from the current software which is working fine.

Re: onsrud tech series with b&r controller.

Anonymous — Wed, 04 Dec 2019 02:18:17 GMT

I've attached a job that has quite a few operations. instead of one massive operation we brake them down in case of having to reset of change pieces in the programming.

hope this helps.

Re: onsrud tech series with b&r controller.

Anonymous — Thu, 12 Dec 2019 09:23:04 GMT

any luck with modifying a post processor?

Re: onsrud tech series with b&r controller.

boopathi.sivakumar — Fri, 13 Dec 2019 10:39:14 GMT

@Anonymous

I had checked the sample files you have provided there are lot of changes needs to be incorporated and it needs some back and forth testing of the codes to validate the post. So I suggest you to contact one of our re-sellers to do the job for you.

Autodesk services marketplace